Setting Your Station Id; Setting Tone Or Pulse Dialling Mode (Not Available For New Zealand) - Brother MFC-240C Quick Setup Manual

STEP1
Setting Up the Machine
11

Setting your station ID

You should store your name and fax number to be
printed on all fax pages that you send.
1
Press Menu.
2
Press 0.
3
Press 3.
4
Enter your fax number (up to 20 digits) on the
dial pad, and then press OK. To enter a "+" for
international codes, press l. For example, to
enter the UK dialling code "+44", press l, 4, 4
and then the rest of your number.
Fax:+44XXXXXXXX
5
Enter your name (up to 20 characters) using
the dial pad, and then press OK.
Name:_
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the same
key as the last character, press
cursor to the right.
• If you entered a letter incorrectly and want to
change it, press
under the incorrect character, press Clear/Back.
Press One
key time
2
3
4
5
6
7
8
9
6
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to step 1.
For details, see Entering Text in Appendix C
of the User's Guide.
12
to move the
or to move the cursor
Two Three
times times
A B C
D E F
G H I
J K L
M N O
P Q R
T U V
W X Y
12 Setting tone or pulse dialling
mode (not available for New
Zealand)
Your machine comes set for a Tone dialling service. If
you have a Pulse dialling service (rotary), you need to
change the dialling mode.
1
Press Menu.
2
Press 0.
3
Press 4.
4
Press a or b to choose Pulse (or Tone).
Press OK.
5
Press Stop/Exit.
Four
times
2
3
4
5
6
S
8
Z