Baumer VEXU Series Quick Start Manual

Quick Start Guide
VEXU cameras (USB 3.0)
Latest software version and technical
documentation available at:
vt.baumer.com

Safety

Safety Precautions

Notice
Conformity:
See the User's Guide for the
CE, RoHS
complete safety instructions!

CE

We declare, under our sole responsibility, that
▪ Protect the sensor from dirt and
the previously described Baumer VEXU camer-
moisture.
as conform with the directives of the CE.
▪ Do not allow the camera to become
contaminated with foreign objects.

Environmental Requirements

RoHS

Storage temp.
Operating temp.
All VEXU cameras comply with the recom-
mendation of the European Union concerning
Humidity
RoHS Rules.

Further Information

For further information about our products, please visit www.baumer.com
For technical issues, please contact our technical support:
support.cameras@baumer.com · Phone +49 (0)3528 4386-845 · Fax +49 (0)3528 4386-86
© Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany
Technical data has been fully checked, but accuracy of printed matter is not guaranteed.
The information in this document is subject to change without notice.
Printed in Germany 04/18. v13

Product Specification

VEXU cameras – Integrating essential basic functionalities
▪ up to 2.3 Megapixel
▪ up to 217 fps
▪ 29 × 29 mm housing with all-sided M3 mount
▪ Global shutter architecture for minimized motion blur
▪ Integrating essential basic functionalities
▪ USB bus powered
▪ USB Vision TM standard compliant
Notice
Further technical details are available in the respective data sheets.

System Requirements

Single-camera system
Recommended
CPU Intel
CPU @ 2.50 GHz, Cores: 4
Caution
Observe precautions for
RAM
handling electrostatically
Operating Microsoft
sensitive devices!
system Microsoft
(OS) Microsoft
-10 ° C ... +70 °C
see Heat Trans-
mission
10 % ... 90 %
Non-condensing
11164079
Multi-camera system
Recommended
Core i5-2520M Intel Core i7-3770
® ™ ® ™
CPU @ 3.40 GHz, Cores: 8
4 GB 8 GB
® Windows ® 7 32 / 64 bit systems (required for USB 3.0)
® Windows ® 8 32 / 64 bit systems (required for USB 3.0)
® Windows ® 10 32 / 64 bit systems (required for USB 3.0)

Dimensions

30
2 x M3 x 4
3
8,4 37,8
29
Installation

Lens Mount

Notice
Ensure the sensor and lens are not contaminated with dust and airborne
particles when mounting the support or the lens to the device!
The following points are very important:
▪ Install the camera in an environment that is as dust free as possible!
▪ Keep the dust cover (bag) on the camera for as long as possible!
▪ Hold the camera with the sensor downwards if the sensor is uncovered.
▪ Avoid contact with any of the camera's optical surfaces!
8 x M3 x 4
CS-mount
1,55 ±0,35
6,15
18
3