1. Connect your microphone to the MIC jack.
2. Play the music you want.
3. Sing along with the accompaniment.
Adjust the microphone volume by pressing
MIC +/- on the remote control.
y When not using the microphone, set the
MIC volume to minimum or turn off the MIC
and remove the microphone from the MIC
y If the microphone is set too near the speaker,
a howling sound may be produced.
In this case, move the microphone away from
the speaker or decrease the sound level by
using the MIC +/- on the remote control.
y If sound through the microphone is extremely
loud, it may be distorted. In this case, press
MIC - on the remote control.
y You can give an echo effect to the sound
from the microphones by pressing ECHO on
the remote control.
y MIC function does not operate on OPTICAL
or LG OPT function.
You can reduce the vocal tones during music
playback from various input sources.
Press VOICE CANCELLER on the remote control
and "ON - VOICE CANCELLER" will appear in display
To cancel it, press VOICE CANCELLER on the
remote control again.
The quality of the VOICE CANCELLER may be
different depending on the recording conditions of
the music files.
y This function is available in the USB or BT
y If the function is not available, "NOT
SUPPORT" appears in the display window.
y This function is available to use only when a
microphone is connected.
y If a microphone is not connected, "INSERT
MIC" appears in the display window.
y It is not available on the mono source.
y To initialize it, change the function or
disconnect the microphone.
y This function may not be initialized depending
on the status of connected devices.