LG PAHCMS000 Installation Manual page 30

AHU COMMUNICATIONS KIT INSTALLATION
Main Module Settings
LED Display
Name
L01L
L02L
L03L
L04L
L05L
L06L
Main Module Address Setting
An address for the main module is needed when PAHCMS000 is connected to an LG central controller
The address of main module can be set within '1~247'. In this case, the address of the main module
should be the same as the address in LG central controller.
Setting Method
- Press 'Set' button (red)
- Select 'Addr' in 7- Segment using ▲▼ buttons and then press the 'Set' button
- Press 'ESC' button to exit
30
Port Function
LED1 Module Comm. Tx
LED2 Module Comm. Rx
LED3 ODU Comm. Tx
LED4 ODU Comm. Rx
LED5 Modbus Comm. Tx
LED6 Modbus Comm. Rx
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Communication Module
Main Module