Summary of Contents for Vax Air Lift Steerable UCPESHV1
Page 1
Lift STEERABLE POWERFUL UPRIGHT WITH LIFT OUT CYLINDER LET’S GET STARTED. UCPESHV1 UCPMSHV1 UCUESHV1 UCSUSHV1...
Page 2
Let’s talk safety This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. • This vacuum cleaner can be used by children aged from 8 Basic years and above and persons with reduced physical, sensory or safety mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of...
Page 3
• Keep fingers, hair and loose clothing away from moving parts and openings whilst using the vacuum cleaner. • Only Vax recommended tools should be used with the vacuum cleaner, use of non-branded Vax accessories/tools will invalidate your warranty. • Unplug and switch off the vacuum cleaner before performing maintenance or troubleshooting checks.
Page 4
Maintaining your carpets and hard floor will ensure they keep their appearance for longer. You’ve chosen the carpets and hard floors for your home for a reason and Vax will help you take good care of them.
Page 5
Lift Steerable Pet Contents Included with all models 3-in-1 Tool (Crevice, Dusting Let’s talk safety and Upholstery Tool) TurboTool Getting to know your machine Hard Floor Adaptor Getting started Lift Steerable Pet Max As per Air Lift Steerable Pet, plus Using your machine Fur ‘n’...
Getting started PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE Before you begin cleaning WARNING: Always switch off the vacuum cleaner before connecting or disconnecting the lift out cylinder/ hose/attachments or removing and emptying the dirt container. IMPORTANT: The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the thermostat will automatically turn the vacuum cleaner off.
Page 8
Using your machine - The full unit Using with the lift out cylinder attached Twist the quick release Plug the vacuum cleaner Hook the cord onto the Place foot on the floorhead cord hooks and release into the mains and handle cord hook so that and pull the handle the power cord.
Page 9
Using your machine - The full unit Using the hose/extension tube/accessories with the lift out cylinder attached Always switch off the vacuum cleaner before connecting or disconnecting the hose/ tools. Hold the lift out cylinder by the carry handle at all times when using the hose and accessories. For easier cleaning detach the lift out cylinder for stair and above floor cleaning.
Page 10
Using your machine Using the hard floor adaptor IMPORTANT: Always check that the adaptor, wheels and brushbar are free from any dirt or debris before use. Do not use the hard floor adaptor if it has become damaged or worn. Remove any sharp objects from the floor that could become trapped and may scratch or damage the surface.
Page 11
Using your machine - The lift away lift out cylinder Using the hose/extension tube/accessories with the detached CAUTION: Hold the lift out cylinder by the carry handle at all times when the lift out cylinder is detached for stair and above floor cleaning. Only attach the hose to the vacuum cleaner with the lift out cylinder attached. Hold the carry handle Lift and remove the lift out Press the hose end clip...
Page 12
Taking care of your machine IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the machine should overheat, the thermostat will automatically turn the machine off. Switch off and unplug the vacuum cleaner. Check the machine for blockages and clean the filters .
Page 13
Taking care of your machine Cleaning the separator Lift the dirt container lid Pull the pre-motor filter tab Lift and remove separator Re fit the separator making release clip. In a hinge and remove the filter from out of dirt container. Using sure the semi circular tab like manor lift the dirt the dirt container.
Page 14
Let’s talk technical IMPORTANT: Unplug and switch off vacuum cleaner before performing maintenance or troubleshooting checks. If the brushbar has been obstructed, the brush bar motor protection sensor may have been activated. The brushbar will stop and the light on the floorhead will illuminate red. Resetting/removing debris from the brushbar The brushbar indicator Press the On/Off button...
Page 15
Let’s talk technical Changing the belt Using a crosshead Pull to remove the belt Pull to remove the Clean any debris from screwdriver, remove 3 cover. brushbar location plate. spindle. Place new belt screws from the belt Remove belt. onto spindle, lining up cover on the side of the teeth on the belt over floorhead.
Page 16
What to do if it goes wrong Problem Solution • Check the ‘This pack contains’ panel on the box to make sure the part is included with your vacuum cleaner. There is an accessory missing • The plug may not be fully pushed into the electrical socket. •...
Page 17
Getting in touch † Registration required. Terms and conditions apply, see vax.co.uk for details.
Page 18
Accessories Don’t forget your accessories! Order at: www.vax.co.uk/spares-and-solutions Pro Cleaning Kit (Type 2) 1-1-133326 All our best tools all in one kit that makes cleaning your home quicker, easier and with even better results. We’ve taken care of cleaning all of the hard to reach areas such as on top of cupboards and in between blinds to the dust that collates behind and within the radiator.