Sony D-EJ1000 Marketing Operating Instructions Manual page 27

Symptom
CHARGE lamp flashes when
you press a button, the CD
does not play.
Cannot adjust the volume
with the VOL +/– buttons on
the CD player.
During recording with optical
digital connection, the track
number cannot be recorded
correctly.
The rechargeable batteries
cannot be charged.
Playback starts from the
point you stopped. (resume
function)
Rustling noise is heard from
the CD.
When closing the lid of the
CD player, the CD starts to
rotate.
You cannot operate the CD
player properly using the
remote control.
Cause and/or corrective actions
c The buttons are locked. Slide the HOLD switch back. (page 15)
c The CD player is connected to an audio device. Adjust the volume
using the volume control on the connected device. (page 17)
c Record the track number again using a MiniDisc recorder, DAT
recorder, etc. (page 17)
c See the instruction manual that comes with the recording device.
(page 17)
c The terminals on the CD player or the charging stand are dirty.
Wipe them with a dry cloth.
c The CD is playing. Stop play.
c The external battery case is connected to the CD player. Remove it
and start charging again.
c The resume function is working. To start playing from the first
track, turn the rotary control on the remote control toward N/>
and hold it until the first track starts playing (press > N for 2
seconds or more for the CD player), or open the lid of the CD
player. Or, remove all power sources, then insert the batteries or
connect the AC power adaptor again. (pages 7, 8, 19, 22)
c Close the lid of the battery compartment firmly. (page 19)
c The CD player is reading the information on the CD. It is not
malfunctioning.
c The buttons on the CD player are kept pressed by mistake.
27