Installing The System Fan; Power Connector Port; Removing Power Connector Port - Dell Latitude 5480 Owner's Manual

GUID-15C24BE1-D4B5-488A-AF84-42253753B618

Installing the system fan

1 Place the system fan into the slot on the computer.
2 Connect the system fan cable to the connector on the system board.
3 Install the:
a chassis frame
b WWAN card(optional)
c hard drive assembly(optional)
d battery
e base cover
4 Follow the procedure in
GUID-533F671B-CE7F-422E-AF5B-742BAE7BCF2F

Power connector port

GUID-FE9ABFCB-5A90-4033-9757-FFE9868A781B

Removing power connector port

1 Follow the procedure in
2 Remove the:
a base cover
b battery
3 To remove the power connector port:
a Remove the M2*3 screw that secures the display cable to the computer [1].
b Disconnect the power connector port cable from the connector on the system board [2].
c Remove the M2*3 screw to release the metal bracket that secures the power connector port [3].
d Lift the metal bracket [4].
e Lift the power connector port away from the computer [5].
After working inside your computer.
Before working inside your computer.
Removing and installing components 33