Sony CDX-C8050X Product Guide Operating Instructions Manual page 13

When you connect an optional CD unit, you
can label CD and CD TEXT discs with a
personalized name using the disc memo
function. Refer to "Labeling a CD" (page 15).
However, if you use personalized labels, they
will always take priority over the original CD
TEXT information when such information is
displayed.
After you select the desired item, the display
will automatically change to the Motion
Display mode after a few seconds.
In the Motion Display mode, all the items are
scrolled in the display one by one in order.
Tip
The Motion Display mode can be turned off. (See
"Changing the sound and display settings" on
page 29).
Automatically scrolling a disc name
— Auto Scroll
If the disc name, artist name, or track name on
an MD or a CD TEXT disc exceeds 10
characters and the Auto Scroll function is on,
information automatically scrolls across the
display as follows:
• The disc name appears when the disc has
changed (if the disc name is selected as the
display item).
• The track name appears when the track has
changed (if the track name is selected as the
display item).
• The disc or track name appears depending on
the setting when you press (SOURCE) to select
an MD or CD TEXT disc.
If you press (DSPL) to change the display
item, the disc or track name of the MD or CD
TEXT disc is scrolled automatically whether
you set the function on or off.
1
During playback, press (MENU).
2
Press either side of (DISC/PRST)
repeatedly until "A.Scrl" appears.
3
Press (+) side of (SEEK/AMS) to select
"A.Scrl on."
4
Press (ENTER).
To cancel Auto Scroll, select "A.Scrl off" in
step 3 above.
01US04CD/MD-U.p65
Note
For some CD TEXT discs with very many characters,
the following cases may happen:
— Some of the characters are not displayed.
— Auto Scroll does not work.
Locating a specific track
— Automatic Music Sensor (AMS)
Locating a specific point in a track
— Manual Search
Note
If "
display, you have reached the beginning or the
end of the disc and you cannot go any further.
Locating a disc
— Disc Selection
13
During playback, press either side of
(SEEK/AMS) momentarily for each track
you want to skip.
To locate
preceding
tracks
During playback, press and hold either
side of (SEEK/AMS). Release when you
have found the desired point.
To search
backward
" or " " appears in the
When an optional CD/MD unit is
connected, press either side of
(DISC/PRST) to select the desired disc.
The desired disc in the current optional
CD/MD unit begins playback.
1/20/00, 10:13 PM
To locate
succeeding
tracks
To search
forward
13