Advertisement
Sony LCD Compatible Installation
PROJECTOR COMMUNICATIONS KIT
PLEASE READ THIS DOCUMENT FOR IMPORTANT
THIS KIT HAS BEEN SHIPPED WITH THE FOLLOWING COMPONENTS:
Kit Type: SONY LCD compatible
Included Communications Adapter(s):
Quantity
1
1
THE TABLE BELOW LISTS THE POSSIBLE CONFIGURATION(S) AND CORRESPONDING
COMMUNICATIONS ADAPTER(S) FOR YOUR PROJECTOR MANUFACTURER'S VARIOUS
MODELS. PLEASE NOTE THAT YOUR SWITCHER HAS BEEN CONFIGURED AS
INDICATED BY THE " " IN THE "Config as" COLUMN. IF YOUR PROJECTOR MODEL
DIFFERS FROM THIS CONFIGURATION, YOU MUST RECONFIGURE YOUR SWITCHER
WITH THE CORRECT SETTINGS.
PLEASE REFER TO THE FOLLOWING PAGES FOR COMPLETE CONFIGURATION AND
SIGNAL CONNECTION INSTRUCTIONS.
THIS SWITCHER HAS BEEN CONFIGURED FOR:
Config
Model
as
Sony VPL-X600
Sony VPL-X2000U
Sony RS-232
Sony PX Series
Extron • System 8/10 P
LUS
SYSTEM 8/10 Plus
ATTENTION!
INSTALLATION INSTRUCTIONS
Part Number
26-483-01
26-473-01
Rotary Switches Cable
RS1 RS2 RS3 RS4 J2/J3 1 2 3 4 5 6 7 8 9 10 Adapter
1
0
5
1
0
5
0
0
E
1
0
E
• User's Manual • P/N 68-428-01 Rev. E
Configuration and Connections
Description
ADP, IR COMM
ADP, UNV, "E"
SONY LCD VPL-X600,
VPL-X2000U
SW15 Settings
3
J2
3
J2
8
J2
8
J2
Comm
26-483-01
26-483-01
26-473-01
26-473-01
Page 1
Advertisement
Table of Contents
Related Manuals for Sony 26-483-01
Summary of Contents for Sony 26-483-01
-
Page 1: Installation Instructions
Sony LCD Compatible Installation PROJECTOR COMMUNICATIONS KIT PLEASE READ THIS DOCUMENT FOR IMPORTANT INSTALLATION INSTRUCTIONS THIS KIT HAS BEEN SHIPPED WITH THE FOLLOWING COMPONENTS: Kit Type: SONY LCD compatible Included Communications Adapter(s): Quantity Part Number 26-483-01 26-473-01 THE TABLE BELOW LISTS THE POSSIBLE CONFIGURATION(S) AND CORRESPONDING COMMUNICATIONS ADAPTER(S) FOR YOUR PROJECTOR MANUFACTURER’S VARIOUS... - Page 2 Main Power LED should light. Apply power to the projector. Extron • System 8/10 P • User’s Manual • P/N 68-428-01 Rev. E is already configured for the Sony LCD VPL- 1 2 3 4 5 6 RS5 RS2 Configured For:...
- Page 3 Use the illustration below when connecting the System 8/10 P VPL-X600 projector. Refer to Sony documentation to continue the installation. _ You cannot input S-Video and Composite Video sources simultaneously on this Sony model. 15-Pin _ If the installation includes looping (master/slave) switchers, see Chapter 5.
- Page 4 Main Power LED should light. Apply power to the projector. Extron • System 8/10 P • User’s Manual • P/N 68-428-01 Rev. E is already configured for the Sony LCD VPL- 1 2 3 4 5 6 RS5 RS2 Configured For:...
- Page 5 Use the illustration below when connecting the System 8/10 P VPL-X2000U projector. Refer to Sony documentation to continue the installation. _ You cannot input S-Video and Composite Video sources simultaneously on this Sony model. _ The projector’s Input Select buttons (Video and Select) allow you to select either RGB/Composite video or RGB/S-video.
- Page 6 Main Power LED should light. Apply power to the projector. 8. Return System 8/10 P Extron • System 8/10 P • User’s Manual • P/N 68-428-01 Rev. E is already configured for a Sony RS-232 1 2 3 4 5 6 RS5 RS2 Configured For: RS-232 .
- Page 7 Sony RS-232 Projector Connections Use the illustration below when connecting the System 8/10 P RS-232 projector. Refer to Sony documentation to continue the installation. Note: Set switch to RS-232C _ If the installation includes looping (master/slave) switchers, see Chapter 5.
Need help?
Do you have a question about the 26-483-01 and is the answer not in the manual?
Questions and answers