Cleaning And Maintenance Of The Device - Silvercrest SFR 37 B1 Operating Instructions Manual

BB*5$ B%ERRN 6HLWH  0RQWDJ  0DL    
7. Cleaning and maintenance of the
device
DANGER! Risk of electric shock!
~ The shaving head|3 can be cleaned under running water.
Disconnect the device from the plug-in power unit cable|17
prior to doing so.
~ The plug-in power unit and the corresponding cable|17 must
not be held under running water and must not be immersed
in other liquids.
WARNING! Risk of material damage!
~ Do not use any astringent or abrasive cleaning agents.
~ Do not place excessive pressure on the shaving foils|1. They
are thin and can be damaged easily.
~ Use the cleaning brush|18 for cleaning the cutter block|16
only. Under no circumstances should the shaving foils|1 be
cleaned with it.
NOTE: to ensure a consistently smooth shave, the device must be
cleaned and maintained regularly.
Cleaning after every dry shave
1. Press both release buttons|4 and take off the shaving foil
frame|2.
2. Tap the shaving foil frame|2 carefully.
3. Clean the cutter blocks|16 with the cleaning brush|18.
4. Place the shaving foil frame|2 on the device in such a way
that it locks into place.
15
GB