Connecting The Unit To The Power Outlet; Connecting The Unit To Your Computer - Sony Gigavault RHCU2 Operating Instructions Manual

Connecting the Unit to the Power Outlet

When you use the unit for the first time, it is necessary to connect it to the power outlet
using the AC adaptor and power cord.
Connect the power cord to the AC adaptor. Next, connect the DC cable of the AC adaptor
to the DC connector of the unit. Finally, connect the power cord to the power outlet. When
you do so, the unit automatically begins charging its internal battery.
Make sure that the power outlet is close to the unit and readily accessible.
To AC outlet
Note
The shape of the power cord varies depending on the country or region of purchase.

Connecting the Unit to your Computer

Connect the USB cable to the unit. Then, connect the cable to a USB port of your
computer.
Note
Supplied driver software is required for Windows 98 SE and highly recommended for Windows Me/2000/
XP users.
• With Windows 2000, Windows Me, Windows 98 SE, install the device driver before connecting the unit
to your computer.
• With Windows XP, install the device driver after connecting the unit to your computer.
For details about how to install the device driver, see "Installing the Device Driver".
To your
computer
DC connector
AC adaptor
USB port
USB cable
5