Advertisement
Quick Set-up Guide [cont]
10
Loosen the set screw on the focuser. Remove the
plastic cap covering the end of the focuser.
13
Slide the finderscope into the dovetail bracket built-in
to the focuser. Secure finderscope with locking screw.
16
Select an object to locate from the SkyScout's
database.
19
Look inside the 40mm eyepiece and center the object.
Rotate the pan handle to lock the telescope in place.
WARNING:
without proper filtering!
11
Insert the diagonal into the focuser and tighten the
set screw.
14
Hold the SkyScout with the larger targeting window
towards the front end of the telescope. Align the holes
at the bottom of the SkyScout with the alignment pins
on the bracket. Place the holes over the pins and
press the SkyScout down until it is firmly seated on
the bracket.
17
Rotate the telescope's pan handle counterclockwise
and move the telescope in the direction indicated by
the red targeting arrows.
For detailed usage information please consult
Never attempt to view the sun through any telescope
12
Insert the chrome barrel of the 40mm eyepiece into
the diagonal and tighten the set screw.
15
Use the adjustment knobs on the bracket to align the
SkyScout with the telescope's eyepiece. See
instruction manual for complete alignment procedure
18
Slowly move the telescope until all the targeting
arrows are illuminated.
your owner' s manual.
Advertisement
