How To Use Your Bissell Lift-Off; Power Switch - Bissell Lift-Off 3554 User Manual

How to use your BISSELL Lift-Off

6
Power Cord Quick Release
The Power Cord is stored at the side of the Detachable Canister,
wrapped around two Cord Wraps. A molded clip on the
polarized plug allows it to be fastened to the Power Cord
during storage.
1. Unclip polarized plug from Power Cord.
2 Rotate the Upper Cord Hook one-half turn right or left, and
slip Power Cord from Upper and Lower Cord Wraps.
3. Plug in the Power Cord Plug into a polarized outlet.
4. To keep the Power Cord out of your way while cleaning,
place it in the Cord Hook, located near the top of the Handle.

Power Switch

The Power Switch is located just below the carry handle on the
Detachable Canister. Push the rocker switch "ON" to vacuum,
and "OFF" when cleaning is complete.
NOTE: This unit is equipped with a special internal switch that turns the
rotating brush off whenever the unit is inthe upright position.
Quick
Release
Cord
Power
Wrap
Switch