Table of Contents
Advertisement
Quick Links
12843 Foothill Blvd.,
Suite D
Sylmar, CA
91342
818 898 3380 voice
818 898 3360 fax
info@dnfcontrols.com
www.dnfcontrols.com
Model No. 4000CL-MAV-PBIO
(&4000CL-MAV-T-PBIO)
250 CLIP FAST ACCESS SYSTEM
with Peripheral Bus Interface Option
Sony DP Protocol
for SONY MAV-555 Video Servers
USER MANUAL
1 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option
Advertisement
Table of Contents
Related Manuals for DNF Controls 4000CL-MAV-PBIO
Summary of Contents for DNF Controls 4000CL-MAV-PBIO
-
Page 1: User Manual
818 898 3360 fax info@dnfcontrols.com www.dnfcontrols.com Model No. 4000CL-MAV-PBIO (&4000CL-MAV-T-PBIO) 250 CLIP FAST ACCESS SYSTEM with Peripheral Bus Interface Option Sony DP Protocol for SONY MAV-555 Video Servers USER MANUAL 1 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option... -
Page 2: Table Of Contents
VIEW THE IN (OUT) POINT CLEARING AN IN (OUT) POINT TRIM CLIPS VIEW CONTENTS OF CUE POINT TRANSFERRING CUELIST TRANSMIT CUE LIST FUNCTION RECEIVE CUELIST FUNCTION 2 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option Table of Contents... - Page 3 FUNCTION TABLE SPECIFICATIONS ST300 RS422 SERIAL CONNECTOR POWER CONNECTOR AUX CONNECTOR (PBUS IN) RS422 SERIAL CONNECTOR GPI IN/OUT CONNECTOR KEY LAYOUT Manual Version...3.1 040303 Document No...…... 4000CL-MAV-PBIO_User_ Manual.doc 3 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option...
-
Page 4: Revision History
REVISION HISTORY 120602 Rev. 3.0 Added GPI’s 040303 Rev. 3.1 Added Key Layout 4 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option... -
Page 5: Getting Started
SYSTEM DESCRIPTION NOW, production switchers can load & play video clips on Sony MAV DDRs. Use the EMEM or SNAPSHOT Learn & Recall functions of the production switcher to load and play a video clip from a Recall or timeline. -
Page 6: System Installation
Enable the Peripheral Device Addresses assigned to the ST300. Enable the appropriate Learn/Recall levels. Enable the Timeline or Recall Trigger function. 6 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option Press [MENU] and turn the Wheel until “Peripheral Address” is displayed. -
Page 7: Connection Diagram
CONNECTION DIAGRAM 7 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option... -
Page 8: Video Server Setup
VIDEO SERVER SETUP The SONY MAV unit must have the following or higher software versions: V1.1 Clips loaded from the front panel of the MAV will not be displayed on the ST300. SETUP MENU/RECORD MODE. Crash and Lockout are the only modes supported. -
Page 9: Learn On The Production Switcher
RECALL the desired REGISTER NUMBER. The ST300 will automatically load the Learned clips on the Learned VTRs, cue the clips to the Learned time, then set the Learned GANG mode. 9 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option... -
Page 10: Triggers From The Production Switcher
Peripheral Device Address for one of the GANGed VTRs. The Trigger will be sent to the enabled VTR. The other VTRs in the GANG will perform the same action. 10 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option Mode... -
Page 11: Advanced Features
NOTE: The only functions available for new clips are RECORD and STOP. In order to playback a newly recorded clip, you must reload it on a Player port. 11 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option... -
Page 12: Trimming A Clip
CLIP LIST function. Upon saving the new clip, marked IN and OUT points are cleared. NOTE: Do not create trimmed clips with a duration of less than 18 frames. 12 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option... -
Page 13: View Contents Of Cue Point
TO TRANSMIT CUE POINTS TO THE ST300 TO TRANSMIT CUE POINTS TO THE PC 13 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option Connect the VTR4 connector on the rear of the ST300 to the VTR4 connector of the receiving ST300, using an RS422 9-pin cable with TX and RX lines crossed. -
Page 14: Receive Cuelist Function
TO RECEIVE CUE POINTS FROM THE ST300 TO RECEIVE CUE POINTS FROM THE PC 14 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option Connect the VTR4 connector on the back of the ST300 from the VTR4 connector of the transmitting ST300 using RS422 9-pin cable with TX and RX lines crossed. -
Page 15: Reference
Press Softkey [STATIC]. The Preset Speed register is NOT updated when exiting SLOMO mode. It is only changed by [SHIFT] + [SLOMO] (PRESET SLOMO). 15 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option (Turning Wheel Clockwise) SLOMO with:... - Page 16 SWITCHER TYPE TRANSMIT CUELIST Transmit cuelist to another ST300 or to a PC. Receive cuelist from another ST300 or PC. RECEIVE CUELIST 16 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option ST300 SETUP Clear Cues SetDefault...
-
Page 17: Function Table
[SHIFT] + [VTR #4] TIME MODE [TIME MODE] SELECT 17 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option Description Search the VTR to the manually entered time. Use the ST300 numeric keypad. Press [ENTER] or [RECUE]. -
Page 18: Specifications
Receive B Common Spare 18 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option 90 VAC to 265 VAC adapter supplied with IEC connector (L” x W” x H”) 12” x 6” x 1.5” (front) 3.0” (rear) 4 lbs. -
Page 19: Gpi In/Out Connector
GPI 4 Out GPI 5 Out GPI 6 Out GPI 7 Out Ground 19 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option Pin# GPI 1 In – Play GPI 2 In – Stop GPI 3 In – Recue GPI 4 In –... -
Page 20: Key Layout
18. KEY LAYOUT 20 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option...
Need help?
Do you have a question about the 4000CL-MAV-PBIO and is the answer not in the manual?
Questions and answers