Scene Store Sub-Menu - Sony DMX-P01 Operating Instructions Manual

2. SCENE STORE Sub-
Menu
This sub-menu allows you to store ten
different parameter settings as a scene
file from scenes nos. 0 to 9. Recalling
the desired scene changes the unit to
the desired setup immediately.
Parameters stored in a scene
file
Parameters set on sub-menus 4 to 11.
Note
For settings on the 10. PANEL LOCK
sub-menu, only the locked switches
and controls are stored. To actually
lock those switches and controls, you
should set the FUNCTION switch to
the LOCK position.
Storing a scene
1
Turn the ADJUST knob until the

2. SCENE STORE sub-menu

appears, and then press the
ADJUST knob.
Status display section
2
Turn the ADJUST knob until the
desired scene number blinks.
Turning the ADJUST knob to the
right changes the scene number in
the following sequences: SCENE
0 t SCENE 1 t SCENE 2
......SCENE 8 t SCENE 9.
Turning the ADJUST knob to the
left changes the scene number in
the reverse order.
The status display section shows
the status of each scene.
Display Status
DEFAULT The corresponding
scene file is not used
(parameters are default
settings).
STORED The default settings are
overwritten (parameters
other than the defaults
are stored).
3
Press the ADJUST knob.
The cursor moves to the status
display section and CANCEL
appears there.
4
Turn the ADJUST knob to the
right to display WRITE.
Turning the ADJUST knob to the
right changes the status display
section in the following sequence:
CANCEL t WRITE t
ERASE.
To cancel the storing operation
and return the cursor to the
scene number selection area:
Display CANCEL.
To reset the parameters to the
default settings:
Display ERASE.
5
Press the ADJUST knob to
execute the change.
Parameters currently set are stored
as a scene with the number
selected in step 2.
27