Download  Print this page


The components on the printed circuit boards will be damaged by static electricity, so avoid
handling them directly. If it is necessary to handle them take the following precautions.
(1) Ground human body and work bench.
(2) Do not touch the conductive areas of the printed circuit board and its electrical parts with any
non-grounded tools etc.
Under no circumstances will Mitsubishi Electric be liable or responsible for any consequential
damage that may arise as a result of the installation or use of this equipment.
All examples and diagrams shown in this manual are intended only as an aid to understanding the
test, not to guarantees operation. Mitsubishi Electric will accept no responsibility for actual use of
the product based on these illustrative examples.
Owing to the very great variety in possible applications of this equipment, you must satisfy yourself
as to its suitability for your specific application.


Table of Contents

   Also See for Mitsubishi Electric MELSEC-A Series

   Related Manuals for Mitsubishi Electric MELSEC-A Series

Comments to this Manuals

Symbols: 0
Latest comments: