Download  Print this page

Advertisement

1.
INTRODUCTION
- - - - - - - - - - - - - - - - - - - - MELSEC·A
(8)
Can be mounted to the DIN rail.
The A2C and A2CI/O modules are usually mounted directly to a control
I
panel or equipment to be controlled using screws. Using the DIN rail
adapter, however, the A2C modules can be mounted to the DIN rail.
(A clearance of 4 mm (0.16 in) between modules is obtained when the
DIN adapters are mounted side by side without leaving clearance
between them. (See App. 1.)
HOOK for removing the
DIN rail adapter
module from the DIN
A2C
A2CI/O module
/Nrall
V-;;;N rail
-.
0
=
-
V
-
r---
1[1
-
\
t =
r----f
\
tr
0
~
~
Fig. 1.7 A2C and A2CI/O Modules Mounted to the DIN Rail
1-8

Advertisement

Table of Contents

   Also See for Mitsubishi Electric MELSEC-A Series

   Related Manuals for Mitsubishi Electric MELSEC-A Series

Comments to this Manuals

Symbols: 0
Latest comments: