Download  Print this page

Mounting To The Din Rail - Mitsubishi Electric MELSEC-A Series User Manual

Hide thumbs

Advertisement

5.
MEMORY ICs BATTERY, CABLES AND DIN ADAPTER
- - - - - - - - - - - - - - - - - - - - MELSEC-A
5.4.4
Mounting to the DIN rail
(1)
Mounting procedure
After fixing the DIN adapter to the module, mount the module to the DIN
rail as follows :
(a) Engage the hook of the adapter with the rail from above the rail.
(b) Push the module onto the rail and fix it in position.
I
DIN rail
adapter hook
DIN adapler ---1-\
J
DIN rail
A module mounted to DIN rail
(c) When two adapters with module are mounted to the rail side by side
without leaving a clearance between them, a 4 mm (0.16 in)
clearance is allowed between the modules. (See Appendix 1, Ex-
..
ternal Dimensions for dimensions of the DIN adapter.)
,
(2)
Removing procedure
Remove the module from the DIN rail as follows.
(a) Pull down the bottom hook of the adapter using a flat blade flat
blade screwdriver.
(b) Pull the module away from the rail while pulling down the bottom
hook.
Module
DIN adapler
Flat blade screwdriver
5-10

Advertisement

Table of Contents

   Also See for Mitsubishi Electric MELSEC-A Series

   Related Manuals for Mitsubishi Electric MELSEC-A Series

Comments to this Manuals

Symbols: 0
Latest comments: