4) Mov (Move Data) (Word) - Hitachi H8/300L Series Programming Manual

2.2.32(4) MOV (move data) (word)

Operation
(EAs) → Rd
Assembly-Language Format
MOV .W <EAs>, Rd
Operand Size
Word
Condition Code
I H
— — — —
I: Previous value remains unchanged.
H: Previous value remains unchanged.
N: Set to 1 when the data value is negative; otherwise cleared to 0.
Z: Set to 1 when the data value is zero;otherwise cleared to 0.
V: Cleared to 0.
C: Previous value remains unchanged.
Description
This instruction moves one word of data from a source operand to a destination register and sets
condition code flags according to the data value.
If the source operand is in memory, it must be located at an even address.
MOV.W @R7+, Rd is identical in machine language to POP.W Rd.
Note that the LSIs in the H8/300L Series contain on-chip peripheral modules for which access in
word size is not possible. Details are given in the applicable hardware manual.
N Z V C
∆ ∆
—
0
93