Preface
Purpose of the documentation
This manual supplements the system manual of the S7-1500 automation system and the
function manuals. All cross-system functions are described in the system manual and in the
function manuals.
The information provided in this manual and the system manual enables you to commission
the CPU 1518-4 PN/DP MFP.
Basic knowledge required
To understand this documentation, you need to have general knowledge of automation
engineering. You also need basic knowledge of the following topics:
● Knowledge of the industrial automation system SIMATIC
● Knowledge of working with STEP 7
● Knowledge of working with Linux systems
● Knowledge of programming with C/C++
● Working with the Eclipse development environment
Conventions
● STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the
configuration and programming software "STEP 7 (TIA Portal)".
● ODK: Open Development Kit
● SO: Shared Object
● MFP: Multifunctional platform
Please also observe notes marked as follows:
Note
A note contains important information on the product described in the documentation, on the
handling of the product or on the section of the documentation to which particular attention
should be paid.
4
CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)
Manual, 12/2017, A5E40882737-AA