Operational faults .................. 13 Tool faults ....................13 Technical Data ..................14 Basic equipment ..................14 Standard MiniStrip with HSS blades ..........14 MiniStrip with Titanium coated carbide blades and centering unit 15 Replacement parts ..................15 Optional parts ................... 15...
Switzerland Product description The all new cable stripping tool Nitronic MiniStrip was specially developed for thin cables. It features a patented four-blade system, which provides accurate and exactly repeated stripping of cables. The coating is removed by cutting with rotating blades and strip-off in one single step. This simple procedure allows processing fiberoptic cables as well as coax and Teflon coated cables.
Nitronic AG Mattenstrasse 11 Sdasdasdsdfdsdcdscsdcdcd Das Bild k ann zurzeit nicht angezeigt werden. CH – 2555 Brügg Tel. +41 32 373 70 70 cdcsc Switzerland Operation Adjusting the centering diameter First measure the outer diameter of the cable with the slide gauge.
Nitronic AG Mattenstrasse 11 Sdasdasdsdfdsdcdscsdcdcd Das Bild k ann zurzeit nicht angezeigt werden. CH – 2555 Brügg Tel. +41 32 373 70 70 cdcsc Switzerland Adjusting the stripping length Release the length setting ring gauge (2) by twisting it in the direction of the arrow. (Fig. 3) ...
Nitronic AG Mattenstrasse 11 Sdasdasdsdfdsdcdscsdcdcd Das Bild k ann zurzeit nicht angezeigt werden. CH – 2555 Brügg Tel. +41 32 373 70 70 cdcsc Switzerland up to the outer diameter of the cable. (Fig. 6) Start the stripping action by pulling the grip and the cable, applying a consistent and constant pull.
Lubrication The Nitronic MiniStrip is designed in such a way that it does not require the application of grease or oil. In order to ensure correct function and long service life, avoid contaminating the tool with greasy or oily substances.
Page 8
Nitronic AG Mattenstrasse 11 Sdasdasdsdfdsdcdscsdcdcd Das Bild k ann zurzeit nicht angezeigt werden. CH – 2555 Brügg Tel. +41 32 373 70 70 cdcsc Switzerland Unscrew the end cap (6) and carefully pull out the cover plate (7). The four stripping blades (8) will now be visible.
Pull the stripping head (5) backwards as far as it will go and, holding this position, tighten the end cap (6). (Fig. 15) The Nitronic MiniStrip is now ready for use. Fig. 15 Settle blades Changing the stripping blades (with centering unit) The stripping blades must only be inspected and replaced by a suitably trained person.
Page 10
Nitronic AG Mattenstrasse 11 Sdasdasdsdfdsdcdscsdcdcd Das Bild k ann zurzeit nicht angezeigt werden. CH – 2555 Brügg Tel. +41 32 373 70 70 cdcsc Switzerland Loosen screw (19) (black), not the white one (16)! Loosen nut (18) and centering scale (17) together. (Fig. 17) Fig.
Page 11
Nitronic AG Mattenstrasse 11 Sdasdasdsdfdsdcdscsdcdcd Das Bild k ann zurzeit nicht angezeigt werden. CH – 2555 Brügg Tel. +41 32 373 70 70 cdcsc Switzerland Position and place down the centering device. (Fig. 20) Fig. 20 Position centering device ...
(Fig. 24) Loosen screw (19) (black) and set centering scale (17) to diameter 2 mm. Retighten screw (19) (black) and remove calibrating pin (30). (Fig. 24) Fig. 24 Insert calibrating mandrel The Nitronic MiniStrip is now ready for use.
Das Bild k ann zurzeit nicht angezeigt werden. CH – 2555 Brügg Tel. +41 32 373 70 70 cdcsc Switzerland MiniStrip with Titanium coated carbide blades and centering unit Quantit Description Article Number MiniStrip with Titanium coated carbide blades 010070...