Sony MZ-N707 OpenMG Jukebox NOTES on installing & operating Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. CD Player
  5. MZ-N707 OpenMG Jukebox NOTES on installing &...
  6. Service manual
Sony MZ-N707 OpenMG Jukebox NOTES on installing & operating Service Manual

Sony MZ-N707 OpenMG Jukebox NOTES on installing & operating Service Manual

Minidisc & dat walkman: portable minidisc recorder
Hide thumbs Also See for MZ-N707 OpenMG Jukebox NOTES on installing & operating:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Quick Reference Manual
SERVICE MANUAL
Ver 1.0 2002. 01
US and foreign patents licensed from Dolby
Laboratories.
• OpenMG, "MagicGate", "MagicGate Memory Stick", "Memory Stick",
VAIO,MusicClip and their logos are trademarks of Sony Corporation.
• "WALKMAN" is a trademark of Sony Corporation.
• Microsoft,Windows,Windows NT and Windows Media are trademarks
or registered trademarks of Microsoft Corporation in the United States
and/or other countries.
• IBM and PC/AT are registered trademarks of International Business
Machines Corporation.
• Macintosh is a trademark of Apple Computer,Inc.in the United States
and/or other countries.
• All other trademarks are trademarks of their respective owners. ™ and
® marks are omitted in this manual.
Sony Corporation
9-873-458-01
2002A0500-1
Personal Audio Company
C 2002.1
Published by Sony Engineering Corporation
MZ-N707
Model Name Using Similar Mechanism
Mechanism Type
Optical Pick-up Name
SPECIFICATIONS
MD Recorder
Audio playing system
MiniDisc digital audio system
Laser diode properties
Material: GaAlAs MQW
Wavelength: = 790 nm
Emission duration: continuous
Laser output: less than 44.6 W
(This output is the value measured at a distance
of 200 mm from the lens surface on the optical
pick-up block with 7 mm aperture.)
Recording and playback time
When using MDW-80
Maximum 160 min. in monaural
Maximum 320 min. in stereo
Revolutions
Approx. 380 rpm to 2,700 rpm (CLV)
Error correction
ACIRC (Advanced Cross Interleave Reed
Solomon Code)
Sampling frequency
44.1 kHz
Sampling rate converter
Input: 32 kHz/44.1 kHz/48 kHz
Coding
ATRAC (Adaptive TRansform Acoustic
Coding)
ATRAC3 — LP2
ATRAC3 — LP4
PORTABLE MINIDISC RECORDER
US Model
Canadian Model
AEP Model
UK Model
NEW
MT-MZN707-177
LCX-5R
– Continued on next page –

Advertisement

Table of Contents
loading

Related Manuals for Sony MZ-N707 OpenMG Jukebox NOTES on installing & operating

Summary of Contents for Sony MZ-N707 OpenMG Jukebox NOTES on installing & operating

  • Page 1 US and foreign patents licensed from Dolby Laboratories. • OpenMG, “MagicGate”, “MagicGate Memory Stick”, “Memory Stick”, VAIO,MusicClip and their logos are trademarks of Sony Corporation. • “WALKMAN” is a trademark of Sony Corporation. • Microsoft,Windows,Windows NT and Windows Media are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

  • Page 2: Battery Life

    5mW+5mW, load impedance 24 ohm (US model) General Power requirements Sony AC Power Adaptor connected at the DC IN 3 V jack (country model in parentheses): 120 V AC, 60 Hz (USA, Canada) 230 V AC, 50/60 Hz (Continental Europe) 230 - 240 V AC, 50 Hz (U.K.)

  • Page 3: Table Of Contents

    CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous ra- diation exposure. On power sources • Use house current, Nickel Cadmium rechargeable battery, LR6 (SG) battery, or car battery. • For use in your house: Use the AC power adaptor supplied with this recorder.

  • Page 4: Servicing Notes

    MZ-N707 NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT The laser diode in the optical pick-up block may suffer electro- static break-down because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body.

  • Page 5: General

    Looking at the controls The recorder GROUP/CANCEL button MENU button REC (record) switch HOLD switch Display window USB connecting jack OPEN button Battery compartment T MARK button LINE IN (OPTICAL) jack VOL +/– button MIC (PLUG IN POWER) jack The VOL + button has a tactile dot. There is a tactile dot left side of the MIC (PLUG IN POWER) jack.

  • Page 6: Disassembly

    MZ-N707 • This set can be disassembled in the order shown below. 3-1. DISASSEMBLY FLOW 3-2. CASE (LOWER) (Page 7) 3-3. UPPER PANEL SECTION (Page 7) 3-4. LCD MODULE, UPPER PANEL SUB ASSY (Page 8) 3-6. SET CHASSIS (5192) ASSY (Page 9) 3-7.

  • Page 7: Case (Lower)

    Note: Follow the disassembly procedure in the numerical order given. 3-2. CASE (LOWER) 1 two screws (M1.4) 3-3. UPPER PANEL SECTION set chassis (5192) assy torsion spring (pop up-L) 3 two screws (M1.4) 5 torsion spring (pop up-L) 2 Slide the open slider in the direction of the arrow, and open the upper panel section.

  • Page 8: Lcd Module, Upper Panel Sub Assy

    MZ-N707 3-4. LCD MODULE, UPPER PANEL SUB ASSY Note: On installation, adjust the position of both switch and knob (hold). 2 LCD module switch 3 compression spring (button) 4 button (control A) knob (hold) 3-5. MECHANISM DECK (MT-MZN707-177) 1 five screws (1.7 3 two step screws (MD) 6 mechanism deck...

  • Page 9: Set Chassis (5192) Assy

    3-6. SET CHASSIS (5192) ASSY 2 two screws (1.7 3-7. MAIN BOARD 2 battery terminal board (+) 2.5) 3 set chassis (5192) assy 1 four screws 4 battery case 3 battery terminal (–) MZ-N707 (M1.4 5 main board...

  • Page 10: Op Service Assy (Lcx-5R)

    MZ-N707 3-8. OP SERVICE ASSY (LCX-5R) 1 washer (0.8-2.5) 3 screw (M1.4) 4 rack spring OP service assy (LCX-5R) over write head section 2 gear (SA) 5 screw (M1.4) 6 thrust detent spring 8 Pull off lead screw. 9 Opening the over write head toward the direction A , remove the OP service assy (LCX-5R) toward the direction B .

  • Page 11: Holder Assy

    MZ-N707 3-9. HOLDER ASSY 4 holder assy 2 Open the holder assy 3 boss 1 convex portion 3 boss 3-10. DC MOTOR (SLED) (M602) 2 washer (0.8-2.5) 3 gear (SA) 4 two screws (M1.4) 1 Remove six solders of the motor flexible board. 5 DC motor (sled) (M602)

  • Page 12: Dc Ssm18B Motor (Spindle) (M601)

    MZ-N707 3-11. DC SSM18B MOTOR (SPINDLE) (M601), DC MOTOR (OVER WRITE HEAD UP/DOWN) (M603) 1 Remove six solders of the motor flexible board. 2 tapping screw 8 three tapping screws 9 DC SSM18B motor (spindle) (M601) 3 motor cover 7 DC motor (over write head up/down) (M603) Note: Press-fit the gear (HA) up to the position of the DC motor (over write head up/down)

  • Page 13: Test Mode

    OUTLINE • This set provides the Overall adjustment mode that allows CD and MO discs to be automatically adjusted when in the test mode. In this overall adjustment mode, the disc is discriminate between CD and MO, and each adjustment is automatically executed in order.
  • Page 14 MZ-N707 CONFIGURATION OF TEST MODE [Test Mode $Display Check Mode%] [VOL +] Press the > [Manual Mode] Press the x/CHG [Servo Adjustment] [Audio Adjustment] [Power Supply Adjustment] [OP Alignment Adjustment] [VOL --] Press the [Overall Adjustment Mode] Press the x/CHG [Electrical Offset Adjustment] Power Supply Adjustment Auto Item Feed...
  • Page 15 5. The display changes a shown below each time the [MENU] key is pressed. • Address & Adjusted Value Display Set LCD display 0 11 address adjusted value item number • Jitter Value & Adjusted Value Display Set LCD display 0 11 jitter value adjusted value...
  • Page 16 MZ-N707 • Description of Error Indication Codes Problem Indication code No error Servo system error TOC error Power supply system error Offset system error Disc error • Description of Indication History History code number Description The first error The last error One error before the last.
  • Page 17 SOUND SKIP CHECK RESULT DISPLAY MODE This set can display the count of errors that occurred during the recording/playing for checking. • Setting Method of Sound Skip Check Result Display Mode 1. Set the test mode (see page 13). [REC] 2.
  • Page 18 MZ-N707 4. When all the keys on the set and on the remote commander are considered as OK, the following displays are shown for 4 sec- onds. Example1: When the keys on the set are considered as OK: Set LCD display 8 88 : AD value of the remote commander key (hexadecimal 00 to FF)

  • Page 19: Electrical Adjustments

    After adjusting, release the test mode. 2. Use the following tools and measuring instruments. • Test CD disc TDYS-1 (Part No. : 4-963-646-01) • SONY MO disc available on the market • Digital voltmeter • Laser power meter LPM-8001 (Part No. : J-2501-046-A) •...
  • Page 20 MZ-N707 2. NV adjusted values modifying procedure 1) Select manual mode of the test mode, and set item number 336 (see page 14). Set LCD display 3 36 : Adjusted value [VOL +] 2) Adjust with the key (adjusted value up) or key (adjusted value down) so that the adjusted value becomes 3) Press the key to write the adjusted value.
  • Page 21 28) Select manual mode of the test mode, and set item number 778 (see page 14). Set LCD display 7 78 : Adjusted value [VOL +] 29) Adjust with the key (adjusted value up) or key (adjusted value down) so that the adjusted value becomes 30) Press the key to write the adjusted value.
  • Page 22 MZ-N707 55) Select manual mode of the test mode, and set item number 873 (see page 14). Set LCD display 8 73 : Adjusted value [VOL +] 56) Adjust with the key (adjusted value up) or key (adjusted value down) so that the adjusted value becomes 57) Press the key to write the adjusted value.
  • Page 23 • Adjustment Method of Vl PWM Duty (L) (item number: 764) Set LCD display 7 64 : Adjusted value 1. Connect a digital voltmeter to the AP913 (VLO) on the MAIN [VOL +] board, and adjust key (voltage up) or (voltage down) so that the voltage becomes 2.30 voltmeter MAIN board...
  • Page 24 MZ-N707 TEMPERATURE CORRECTION • Adjustment Method of Temperature Correction 1. Select the manual mode of test mode, and set the item number 015 (see page 14). Set LCD display 0 15 : Adjusted value 2. Measure the ambient temperature. [VOL +] [VOL --] 3.
  • Page 25 Adjustment/checking and Connection Location: – MAIN Board (Component Side) – TP ( ) Q501 L502 L501 TP ( + ) – MAIN Board (Conductor Side) – AP913 (VLO) AP912 (VCO) C513 C529 + C527 C506 C514 24 + IC501 C507 R505 R517 Q901...
  • Page 26 MZ-N707 OVERALL ADJUSTMENT MODE • Configuration of Overall Adjustment Mode Overall adjustment mode (Title display) Protect switch CD overall adjusting All item x/CHG CD overall adjustment x/CHG Protect switch > MO overall adjusting x/CHG MO overall adjustment x/CHG [MENU] x/CHG [END SEARCH] x/CHG [Test mode $display check mode%]...
  • Page 27 • Adjustment Method of CD and MO Overall Adjustment Mode 1. Set the test mode (see page 13). [VOL --] 2. Press the key to activate the overall adjust- ment mode. Set LCD display 0 00 3. Insert CD disc in the set, and press thethe CD overall adjustment mode.
  • Page 28 MZ-N707 RESUME CLEAR Perform the Resume clear when all adjustments completed. • Resume Clear Setting Method 1. Select the manual mode of the test mode, and set item number 043 (see page 14). Set LCD display 0 43 : Address 2.
  • Page 29 REWRITING THE PATCH DATA AT REPLACEMENT OF MAIN BOARD OR NONVOLATILE MEMORY (IC804) This set requires the patch data in the nonvolatile memory (IC804) to be rewritten using the application, when the MAIN board or nonvolatile memory (IC804) was replaced. Caution: The application that meets the microcomputer version in this set must be used when rewriting the patch data.
  • Page 30 MZ-N707 5. Confirm that the model and version indicated on the title bar coincide with the codes displayed in the Device Name block and the Version block in the window. 6. Click the [Write + Verify] button. The patch data writing and the verify processing will be executed automatically in the following order: 1) Writing to patch area (front area) 2) Writing to patch area (reverse area) 3) Verifying patch area (front area)
  • Page 31 MZ-N707 8. Click the [Usb Disconnect] button. 9. Confirm that the window becomes as shown below where the [Write + Verify] button and [Read] button are inactive. 10. Disconnect the USB cable from the personal computer and the set.

  • Page 32: Diagrams

    MZ-N707 SECTION 6 DIAGRAMS 6-1. BLOCK DIAGRAM – SERVO/USB Section – HR601 OVER OPTICAL PICK-UP BLOCK WRITE (LCX-5R) HEAD RF AMP, FOCUS/TRACKING ERROR AMP VREF – – – JX JY JX – RF AMP, IX IY FOCUS/ – TRACKING ERROR A B C D –...

  • Page 33: Block Diagram - Audio Section

    6-2. BLOCK DIAGRAM – AUDIO Section – DIN1 (Page 32) A/D CONVERTER IC301 AUDIO ADDT SDTO (Page 32) CONTROL SDO0 CDTI CONTROL SCK0 CCLK REGISTER SDO0, SCK0 (Page 34) AOUTL, AOUTR (Page 32) 147 XCS ADC SDI0 SDO0 SCK0 SCK0 EEPROM IC804 B+ SWITCH...

  • Page 34: Block Diagram - Display/Key Control/Power Supply Section

    MZ-N707 6-3. BLOCK DIAGRAM – DISPLAY/KEY CONTROL/POWER SUPPLY Section – RMC KEY (Page 33) RMC KEY CLK SEL FFCLR SLEEP (Page 32) VLON WK DET REC KEY HALF LOCK SW SYSTEM CONTROLLER, DIGITAL SIGNAL PROCESSOR, 16M BIT D-RAM IC801 (3/3) SDO0, SCK0 (Page 33) SDO0...

  • Page 35: Note For Printed Wiring Board And Schematic Diagrams

    6-4. NOTE FOR PRINTED WIRING BOARD AND SCHEMATIC DIAGRAMS Note on Printed Wiring Board: Note on Schematic Diagram: • X : parts extracted from the component side. • All capacitors are in F unless otherwise noted. pF: • Y : parts extracted from the conductor side. 50 WV or less are not indicated except for electrolytics •...

  • Page 36: Main Board (Component Side)

    MZ-N707 6-5. PRINTED WIRING BOARD – MAIN Board (Component Side) – • Semiconductor Location Ref. No. Location D601 D603 D607 D610 D803 D804 D904 IC551 IC604 IC804 Q302 Q501 Q601 Q603 Q608 MAIN BOARD (CHASSIS) OPTICAL PICK-UP BLOCK (LCX-5R) (CHASSIS) :Uses unleaded solder.

  • Page 37: Printed Wiring Board - Main Board (Conductor Side)

    6-6. PRINTED WIRING BOARD – MAIN Board (Conductor Side) – MAIN BOARD (CONDUCTOR SIDE) S803 RECHARGEABLE BATTERY PROTECT NC-WMAA DETECT 1PC. 1.2V CN701 (2/2) DRY BATTERY SIZE "AA" CONNECTOR (IEC DESIGNATION LR6) (SHIELD) 1PC. 1.5V R704 C340 C321 C325 R111 C110 Q701 R703...

  • Page 38: Schematic Diagram - Main Board (1/4)

    MZ-N707 6-7. SCHEMATIC DIAGRAM – MAIN Board (1/4) – • See page 42 for Waveforms. (1/4) TP611 HR601 OVER WRITE TP610 HEAD CN501 TRK- TRK- TRK+ TRK+ FCS- FCS- FCS+ FCS+ AGND VREF PDS0 LD-A LD-K PDS1 C518 AVCC L501 10 H C524 L502...

  • Page 39: Schematic Diagram – Main Board (2/4)

    6-8. SCHEMATIC DIAGRAM – MAIN Board (2/4) – • See page 42 for Waveform. (2/4) C561 (Page 38) C551 M602 R560 2.2k (SLED) R561 2.2k R562 2.2k CN502 SLEDN SLEDU SLEDV SLEDW M603 HD DRV- OVER WRITE HD DRV+ R551 HEAD UP/DOWN CLVW R552...

  • Page 40: Schematic Diagram – Main Board (3/4)

    MZ-N707 6-9. SCHEMATIC DIAGRAM – MAIN Board (3/4) – • (3/4) (Page ADDT LRCK R815 XBCK R816 FS256 R831 C801 R829 C841 C820 4.7k C840 4700p 0.01 0.5% 0.01 0.022 (Page R841 See page 42 for Waveforms. DIN1 C817 R858 R857 R825 2.2M...

  • Page 41: Schematic Diagram - Main Board (3/4)

    6-10. SCHEMATIC DIAGRAM – MAIN Board (4/4) – • See page 42 for Waveforms. (4/4) C113 EEPROM R830 IC804 AK6417AM C823 SCK0 XBUSY SDO0 SDI0 C308 R310 A/D CONVERTER IC301 AK5354VT (Page 40) C306 C302 C335 C307 6.3V (Page 38) •...
  • Page 42 MZ-N707 • Waveforms 1 IC501 1 (TE) 7 IC901 th (CLK) 200 mVp-p 5.67 ns 3 IC501 ed (RF OUT) 8 IC801 <zc, (UOSCO) (USB mode) 1 Vp-p 1.9 Vp-p 20.8 ns 4 IC501 rs (FE) 9 IC801 <zbz (OSCO) 100 mVp-p 3 Vp-p 22.1 ns...
  • Page 43 • IC Block Diagrams IC301 AK5354VT-E2 LIN1 IPGA RIN1 LIN2 RIN2 VCOM AGND IC302 TA2131FL (EL) BEEP MT TC VCC1 BEEP BST2 OUTB BEEP OUTA IC303 NJM2173AV (TE2) OUT1 OUT2 AMP1 AMP2 DC CUT1 DC CUT2 MIC V+1 MIC V+2 NOISE STBY 16 PDN...
  • Page 44 MZ-N707 IC501 SN761057A REXT Wpp LPF VREF Tpp/Wpp TON-C PD-NI PD-I PD-O ADIP ADFG DVDD A+B+C+D TWpp PK/BTM CSLO VREF075 Aw+Dw S-MONITOR TON Peak TON Botm Malfa ADIP AwBPF TEMP DwBPF ABCD PEAK/BOTM OF TRK T-ON SERIAL ADIP-IN S-MON ABCD OFC-C1 OFC-C2 AVCC...
  • Page 45 IC551 SC111258FCR2 42 41 PWM2 3PHASE CONTROL VC LOW VOLTAGE DETECTOR CPUO2 CPVO2 CPWO2 BIAS VC VG GND1 CPWO1 CPVO1 CPUO1 3PHASE CONTROL PWM1 35 34 31 30 29 3PHASE H-BRIDGE PRE DRIVER PRE DRIVER – – – – – –...
  • Page 46 MZ-N707 IC601 XPC18A22AFCR2 OUTPUT SW VC VG DC IN HI-BRIDGE CHARGE PRE DRIVER MONITOR X2/X4 BATM DC IN CONTROL CHARGE CHGSW CONTROL DC IN BATTERY INP2 CHARGER & INM2 REGULATOR DCIN DC IN CHGMON DC IN DC IN DC IN SVREF BANDGAP DETECT...
  • Page 47 IC901 XPC18A32FCR2 SERIES PASS OUTPUT SW REGULATOR VA REGULATOR VD XRST OUTPUT SW CRST RSTREF VREF VSTB CLKSEL VAIFON SYSTEM FFCLR CONTROL SLEEP 36 35 34 OUTPUT SERIES PASS SERIES PASS REGULATOR VIF POWER SWITCH 1 BANDGAP REFERENCE POWER STEP-UP SWITCH 2 PRE DRIVER VSTB...

  • Page 48: Ic Pin Function Description

    MZ-N707 6-11. IC PIN FUNCTION DESCRIPTION IC501 SN761057A (RF AMP, FOCUS/TRACKING ERROR AMP) Pin No. Pin Name Tracking error signal output to the system controller REXT — Connect terminal to the external resistor for the ADIP amplifier control WPP-LPF — Connect terminal to the external capacitor for the TPP/WPP low-pass filter VREF Reference voltage output terminal...
  • Page 49 IC801 CXD2677-202GA (SYSTEM CONTROLLER, DIGITAL SIGNAL PROCESSOR, 16M BIT D-RAM) Pin No. Pin Name Load address strobe signal output terminal for D-RAM Not used Test input terminal for D-RAM Not used 3 to 7 Address signal output terminal for D-RAM Not used 8, 9 Two-way data bus terminal for D-RAM Not used 10, 11...
  • Page 50 MZ-N707 Pin No. Pin Name TRST Input terminal for the test mode set (normally fixed at “L”) XOPT CTL Power supply ON/OFF control signal output for the DIN PD drive VG CTL VG power supply voltage control signal output terminal Not used AOUT SEL HP/LINE changeover signal output terminal Not used REC OPR LED...
  • Page 51 Pin No. Pin Name XRST System reset signal input from the power control “L”: reset STAND DET Charging stand detection signal input terminal VB MON Voltage monitor input terminal (A/D input) of the UNREG power supply CHG MON Charge voltage monitor input (A/D input) from the power control VREF MON Clear reference voltage monitor input terminal (A/D input) from the RF amplifier 109, 110...
  • Page 52 MZ-N707 Pin No. Pin Name DAVDD — Power supply terminal (for the built-in D/A converter) (+2.4V) VREFL Reference voltage input terminal (for the built-in D/A converter L-CH) AOUTL Built-in D/A converter (L-CH) output terminal AOUTR Built-in D/A converter (R-CH) output terminal VREFR Reference voltage input terminal (for the built-in D/A converter R-CH) —...
  • Page 53 Pin No. Pin Name DVSS3 — Ground terminal (for the DSP block) — DVDD3 Power supply terminal (for the DSP block) (+1.5V) ADFG ADIP duplex FM signal (20.05 1kHz) input from the RF amplifier Filter cut off control signal output terminal IFVDD3 —...
  • Page 54 MZ-N707 Pin No. Pin Name FLASHVDD — Power supply terminal (for the built-in flash memory) (+2.4V) — FLASHVSS Ground terminal (for the built-in flash memory) 249 to — Not used Description...

  • Page 55: Exploded Views

    NOTE: • -XX and -X mean standardized parts, so they may have some difference from the original one. • Color Indication of Appearance Parts Example: KNOB, BALANCE (WHITE) . . . (RED) Parts Color Cabinet's Color • Abbreviation CND : Canadian model : French model 7-1.

  • Page 56: Chassis Section

    MZ-N707 7-2. CHASSIS SECTION Ref. No. Part No. Description 3-237-072-01 SCREW (MD), STEP 3-238-127-01 SPACER (HOLDER) X-3381-652-1 CHASSIS (5192) ASSY, SET 3-237-075-01 SPRING (POP UP-L), TORSION 3-237-083-01 SPRING (POP UP-R), TORSION 3-239-791-01 SHEET (FULCRUM PLATE LA) Ref. No. Part No. Remark 3-318-382-91 SCREW (1.7X2.5), TAPPING 3-237-080-01 SLIDER, OPEN...

  • Page 57: Main Board Section

    7-3. MAIN BOARD SECTION Ref. No. Part No. Description 3-237-079-01 CASE, BATTERY 3-237-073-01 TERMINAL BOARD (+), BATTERY 3-237-074-01 TERMINAL (–), BATTERY Remark Ref. No. Part No. Description * 104 X-3381-933-1 MAIN BOARD, COMPLETE (EXCEPT US, FR) * 104 X-3381-967-1 MAIN BOARD, COMPLETE (US) * 104 X-3382-202-1 MAIN BOARD, COMPLETE (FR) MZ-N707...

  • Page 58: Mechanism Deck Section-1 (Mt-Mzn707-177)

    MZ-N707 7-4. MECHANISM DECK SECTION-1 (MT-MZN707-177) Ref. No. Part No. Description X-3381-219-1 HOLDER ASSY 3-224-779-02 SPRING, THRUST DETENT 3-225-996-01 SCREW (M1.4) (EG), PRECISION PAN 4-222-216-01 GEAR (SA) 3-338-645-31 WASHER (0.8-2.5) 4-222-208-01 GEAR (SB) mechanism deck section-2 The components identified by mark 0 or dotted line with mark 0 are critical for safety.

  • Page 59: Mechanism Deck Section-2 (Mt-Mzn707-177)

    7-5. MECHANISM DECK SECTION-2 (MT-MZN707-177) M603 Ref. No. Part No. Description 3-225-278-11 SCREW, TAPPING 3-235-838-01 COVER, MOTOR 3-235-836-01 GEAR (HB) 3-222-544-01 GEAR (HA) 3-235-835-01 GEAR (HC) 3-235-834-01 CHASSIS 3-235-830-01 PLATE, RATCHET X-3379-529-4 BASE ASSY, MOTOR 3-225-996-07 SCREW (M1.4) (EG), PRECISION PAN M601 Remark Ref.

  • Page 60: Electrical Parts List

    MZ-N707 MAIN NOTE: • Due to standardization, replacements in the parts list may be different from the parts speci- fied in the diagrams or the components used on the set. • -XX and -X mean standardized parts, so they may have some difference from the original one.
  • Page 61 Ref. No. Part No. Description C522 1-125-777-11 CERAMIC CHIP 0.1uF C523 1-125-837-11 CERAMIC CHIP C524 1-135-259-11 TANTALUM CHIP 10uF C527 1-119-923-11 CERAMIC CHIP C529 1-165-851-11 TANTALUM CHIP 10uF C530 1-164-939-11 CERAMIC CHIP 0.0022uF 10% C531 1-164-943-11 CERAMIC CHIP 0.01uF C551 1-125-777-11 CERAMIC CHIP 0.1uF C557...
  • Page 62 MZ-N707 MAIN Ref. No. Part No. Description C927 1-125-777-11 CERAMIC CHIP C928 1-125-777-11 CERAMIC CHIP < CONNECTOR > CN501 1-573-360-21 CONNECTOR, FFC/FPC 20P CN502 1-573-350-11 CONNECTOR, FFC/FPC 10P CN701 1-816-036-21 CONNECTOR (SQUARE TYPE) (USB) 5P CN801 1-573-355-11 CONNECTOR, FFC/FPC 15P <...
  • Page 63 Ref. No. Part No. Description < RESISTOR > R101 1-218-969-11 RES-CHIP R102 1-208-707-11 METAL CHIP R103 1-218-973-11 RES-CHIP R104 1-218-961-11 RES-CHIP R104 1-218-965-11 RES-CHIP R104 1-218-969-11 RES-CHIP R105 1-218-961-11 RES-CHIP R106 1-208-635-11 RES-CHIP R107 1-218-965-11 RES-CHIP R111 1-208-715-11 METAL CHIP R112 1-208-927-11 METAL CHIP R118...
  • Page 64 MZ-N707 MAIN Ref. No. Part No. Description R825 1-220-804-11 RES-CHIP R826 1-218-990-11 SHORT R827 1-216-864-11 METAL CHIP R828 1-208-691-11 METAL CHIP R829 1-208-699-11 METAL CHIP R830 1-218-989-11 RES-CHIP R831 1-218-990-11 SHORT R832 1-218-985-11 RES-CHIP R833 1-218-957-11 RES-CHIP R834 1-208-935-11 METAL CHIP R835 1-208-951-11 METAL CHIP R836...
  • Page 65 Ref. No. Part No. Description 3-234-038-61 MANUAL, INSTRUCTION (ENGLISH, FRENCH) 3-237-042-11 SOFT (CD-ROM), APPLICATION (US, CND) 3-237-042-21 SOFT (CD-ROM), APPLICATION (AEP, UK, FR) 3-239-304-11 MANUAL, INSTRUCTION (How to Install) (Simple Burner) (ENGLISH) (US, CND) 3-239-304-21 MANUAL, INSTRUCTION (How to Install) (Simple Burner) (FRENCH) (CND) 3-239-305-11 CARD (OPERATING INSTRUCTION) (Simple Burner) (ENGLISH) (US, CND)

  • Page 66: Revision History

    MZ-N707 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2002.01...

Table of Contents