Sony HVR-Z7E/Z7P Operating Manual page 135

7
1 2 3 4
A Lens cover lever (13)
B Focus ring (28)
C Zoom ring (27)
D Iris ring (30)
E ZOOM switch (27)
F DIGITAL EXTENDER/L1 button (43)
G LCD screen (18)
H TC/U-BIT button
Switches between time code and user bit
to display on the LCD screen.
I DATA CODE button (53)
To attach the lens mount cap
Hold the lens mount
cap with the v mark
facing up. Attach the
lens mount cap to the
lens mount with the
center pin on the
back of the cap
inserted in the recess
at the top center of
the lens mount.
To remove the
lens mount cap
Hold the protrusion at the center of the lens
mount cap and remove the cap from the
lens mount.
MANUAL SERVO
5
ZOOM
8
9
qh
6
J Video control buttons (STOP/REW/
PLAY/FF/PAUSE/REC/SLOW) (50)
K VOLUME/MEMORY button (50)
L MEMORY/DELETE button (50)
M MEMORY/INDEX button (50)
N MEMORY/PLAY button (50)
O DISPLAY/BATT INFO button (53)
P RESET button
If you press the RESET button, all settings
including the clock setting (except the Picture
profile and Camera profile settings) return to
the default.
To attach the rear lens cap
Attach the rear lens cap to the rear of the
lens.
To remove the rear lens cap
Hold the two protrusions
on the edge of the rear
lens cap as illustrated and
remove the cap from the
lens.
0
TC/U-BIT DATA CODE
qa
qg qf qd qs
Continued ,
135