Download  Print this page

Product Information; General Information; Bluetooth; Amplifier - Philips CAB11 User Manual

Hide thumbs

Advertisement

9 Product
information
Note
Product information is subject to change without prior
notice.

General information

Power Supply
(through USB socket)
Built-in Battery
Dimensions - Main Unit
(W x H x D)
Weight - Main Unit

Bluetooth

Bluetooth
V2.1+EDR
specification
Supported
HFP v1.6, AD2P v1.2, HSP v1.2
profiles
Range
10 m (Free space)

Amplifier

Rated Output Power
Signal to Noise Ratio
AUX Input
EN
10
5V, 0.6A
Lithium battery
107 x 73 x 53
mm
0.118 kg
1.2 W RMS
> 62 dBA
600 mV RMS, 22 kOhm

10 Troubleshooting

Warning
Never remove the casing of this product.
To keep the warranty valid, never try to repair
the product yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact the
Consumer Care, make sure that the product
is nearby and the model number and serial
number are available.

General

No power
Recharge your speaker.
No sound
Adjust volume on this product.
Adjust volume on the connected device.
When you listen to audio through
Bluetooth, make sure that no audio input
cable is connected to the AUX socket.
Make sure that your Bluetooth device is
within the effective operational range.
No response from the speaker
Restart the speaker.

About Bluetooth device

The audio quality is poor after connection
with a Bluetooth-enabled device.
The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between them.

Advertisement

loading

  Related Manuals for Philips CAB11