Sony MZ-RH10 Hi-MD Music Transfer Version 1 for Mac (User Manual) Operating Instructions Manual page 23

4
Record a disc.
1
Select and pause the sound source to
be recorded.
Connected component
3
While the recorder is stopped, press
the jog dial (N/ENT) while pressing
REC(+N)/T MARK.
"REC" lights up and recording starts.
To
Stop
Pause
Remove the disc
1)
A track mark is added at the point where you press
the remainder of the track will be counted as a new track.
2
PAUSE
4
REC(+N)/
T MARK
Jog dial
(N/ENT)
Press
Press x.
Press X 1)
.
Press X again to resume recording.
Press x and open the lid. (The lid does not open while
"SYSTEM FILE WRITING" is displayed.)
X
again to resume recording while pausing; thus
Make sure that the x indication
appears in the display window.
Make sure the x indication is displayed.
Play the source you want to record.
If you insert a previously recorded disc,
the recording starts after the existing
contents.
Track marks are automatically added at
the same point as the sound source, and
the contents are recorded together as a
group.
Connected component
PAUSE
23