Insignia NS-F10T7-NG Quick Setup Manual

QUICK SETUP GUIDE
10" Table Fan
NS-F10T7-PK / NS-F10T7-BK /
NS-F10T7-NG / NS‐FT10MT8

PACKAGE CONTENTS

• 10" table fan
• Quick Setup Guide

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE IMPORTANT INSTRUCTIONS
1 Use your fan only as described in this Quick Setup Guide.
2 Do not use your fan if it works intermittently, stops working
entirely, or parts are missing or damaged.
3 To reduce the risk of fire or electrical shock, DO NOT use this fan
with any solid-state speed control devices (such as a dimmer
switch) or expose it to water.
4 To help prevent electrical shock, do not immerse your fan, plug,
or power cord in water or spray it with liquids.
5 Close supervision is needed when your fan is being used near
children.
6 Unplug your fan before moving or cleaning it, or when it is not
in use.
7 Never insert fingers or other objects through the grill while the
fan is running.
8 Make sure your fan is on a stable surface during use so it won't
overturn.
9 Do not use your fan in an open window. Rain may cause an
electrical hazard.
10 Do not use your fan near explosive or flammable fumes.
11 Do not place your fan or its parts near an open flame, stove, or
other heating appliances.
12 Do not use your fan if the cord or plug is damaged. Throw your
fan away or return it to an authorized service facility for
examination and/or repair.
13 Do not use your fan after a malfunction, drop, or if it is is
damaged in any way.
14 To unplug, pull the plug from the power outlet. Never yank on
the power cord.
15 Always use your fan on a dry surface.
16 This fan is intended for household use only. Do not use it for
commercial or industrial use.
17 Do not use this fan near curtains, plants, window treatments, or
other loose fabrics.
Before using your new product, please read these instructions to prevent any damage.
18 This fan uses a fuse for overload protection. A blown fuse indicates
that an overload or short-circuit has occurred. If the fuse blows,
unplug the fan from the outlet, then replace the fuse as indicated
(using only a 5 Amp, 125 Volt fuse). If the replacement fuse blows, a
short-circuit may be present and the product should be thrown
away or returned to an authorized service facility for examination
and/or repair.
19 Do not run the power cord under carpeting, throw rugs, runners, or
other coverings. Do not route the cord under furniture or applianc-
es. Keep the cord away from traffic areas where it could be tripped
over.
Power cord
• To insert the plug, hold it firmly and guide it into the outlet.
• To unplug, hold the plug and remove it from the outlet.
• Never pull or yank on the cord or fan.
• Check the cord for cuts and abrasion marks before each use.
• Do not wrap the cord tightly around the fan. This could stress the
cord where it enters the fan and cause it to fray and break.
FEATURES
Power switch/
speed selection
Oscillation
knob
Fan blade
Grill
Adjustment knob