Pre-Treating; Getting Ready - Bissell QUICKSTEAMER 2050 User Manual

How to begin - Continued
Vacuum carpet thoroughly.
3.
Decide where to begin — and end — your job. Clean in 3' X 4'
4.
sections, starting in areas farthest from exit. Plan to leave a path
open to empty soiled water and refill cleaner.
Carpeting will dry in three to four hours, depending on
5.
carpet style and air circulation in room. A floor fan
speeds drying.
Replace furniture on damp carpeting by placing waxed
6.
paper under legs until floor dries completely.

Getting ready

Remove the Clean Water Tank by lifting it straight up,
1.
then away from the Lower Body.
Using the Formula Measuring Cap, add two (2) capfuls of
2.
BISSELL
ing Machines to the Clean Water Tank. Add 1/2-gallon of
hot (NOT boiling) tap water. Fill only to fill line – do not
overfill.
Replace and turn Formula Measuring Cap clockwise
3.
until secure.
Place Clean Water Tank on Lower Body.
4.
Rotate Quick Release Cord Wrap and plug in.
5.
Turn Power Switch [located on the back of the Lower
6.
Body] to (
If cleaner starts when first plugged in, switch cleaner
7.
OFF (

Pre-Treating

Pre-treat stubborn stains and highly soiled carpet in hallways and
other high-traffic areas.
Spray soiled area with BISSELL
1.
Use a stiff-bristled brush to work formula into carpet pile.
2.
Wait 3 -5 minutes before deep cleaning.
3.
6
® Advanced Cleaning Formulas for Deep Clean-
) ON.
) until ready for use.
® Tough Stain PreCleaner.
Tip:
Always vacuum
thoroughly before
you deep clean.
If possible, move
larger furniture to
an area you will
not be cleaning.
1.
Formula
Measuring
Cap
Unscrew to Remove
6.
Power
Switch
Tip:
Deep cleaning
spots, spills
™
and high traffic
areas on a
regular basis can
prolong
carpet life.