ABB Relion RES670 Product Manual page 92

Phasor measurement unit RES670 2.1 IEC
Binary input/output
module, mA and time
synchronizating boards.
For pulse counting, for example kWh metering, the BIM with enhanced pulse counting capabilities must be used.
Note: 1BIM and 1 BOM included in A20 and B20
SOM Static output
module, 12 outputs,
48-60 VDC
SOM static outputs
module, 12 outputs,
110-250 VDC
Selection for position
#11.
Remote end communication, DNP serial comm. and time synchronization
modules
Slot position (rear view)
Available slots in 1/2 case with 1 TRM
Available slots in 3/4 and 1/1 case with 1 TRM
Available slots in 3/4 and 1/1 case with 2 TRM slots
No remote communication board included
IRIG-B Time synchronization module
Galvanic RS485 communication module
GPS Time Module
Serial communication unit for station communication
Slot position (rear view)
No first communication board included
No second communication board included
Optical ethernet module, 1 channel glass
Optical ethernet module, 2 channel glass
92
#11
T1 T1 T1 T1 T1
T2 T2 T2 T2 T2
Selection for position #12.
T1 T1 T1 T1 T1
T2 T2 T2 T2 T2
#12
█ █ █ █
█ █ █ █
█ █ █ █
X X X X
F F F F
G G G G
S S
Selection for position #13.
1MRK 511 367-BEN D
Notes and Rules
T1 T1 Note: SOM must not be placed
in following positions: 1/2 case
slot X51, 3/4 case, 1 TRM slot
X101, 3/4 case, 2 TRM slot X71,
T2 T2
1/1 case, 1 TRM slot X161, 1/1
case, 2 TRM slot X131.
Notes and Rules
█ █
X X
F F Note: One of IRIG-B or GPS
Time Module must be ordered
G G
S S Note: One of IRIG-B or GPS
Time Module must be ordered
#13 Notes and Rules
X
X
D Note: Optical ethernet module
always included, one must be
E
ordered
X
ABB