Safety Notes; Product Description; Intended Use - Bosch SCT 815 Original Instructions Manual

1.5 Safety Notes

WARNING
Severe eye damage from laser beam. Death or
severe injury.
 Never look directly into the laser source.
 Never point the laser beam at people,
particularly at their faces or eyes.
 To test function, hold an object in front of the
exit point of the laser range finder and line
laser.
---Separator---
CAUTION
Risk of injury from objects falling from the
SCT 815. Minor injury.
 Wear safety shoes.
 Always use the arrestor cable to secure the line
laser.
---Separator---
CAUTION
Risk of crushing when adjusting the height of
the prismatic reflector. Minor injury.
 While the height of the prismatic reflector is
being adjusted, do not place fingers between
the tool holder and the guide tubes.
---Separator---
1.6 Related documents
• 1 690 386 038 – P-Assist S5 original operating
instructions
• 1 689 989 376 – GLM 20 original operating
instructions
• 1 689 989 363 – Honda brief instructions
• 1 689 989 364 – Toyota brief instructions
• 1 689 989 365 – Mazda brief instructions
• 1 689 989 366 – Kia brief instructions
• 1 689 989 367 – Hyundai brief instructions
---Separator---

2. Product description

2.1 Intended Use

SCT 815, SCT 815 S1 and SCT 815 S2 are adjustment
devices for calibrating the front radar sensors of the
following makes:
• Mazda
• Honda
• Toyota
• KIA
• Hyundai
In conjunction with diagnostic software, the front radar
sensor can be calibrated for the ACC (adaptive cruise
control) and the emergency braking assistance.
Any other use is considered improper use and is
not permissible.
---Separator---
2.2 Product versions
The SCT 815 is available in three equipment versions.
The equipment versions differ in their scope of
delivery. Depending on the equipment version, 0, 1 or
2 lasers are included.
Robert Bosch GmbH
Product description | SCT 815 | 13 | en
Equipment version Line laser P-
Assist S5
SCT 815 –
SCT 815 S1 –
SCT 815 S2 •
– not included in scope of delivery
• included in scope of delivery
The product versions are all referred to as SCT 815 in
the following.
---Separator---
2.3 Scope of delivery
Designation
Base plate
Guide tubes
Line laser mount
Tool holder for prismatic reflector
3 plastic screws
Prismatic reflector
Mount for laser range finder
Laser range finder GLM 20*
Line laser P-Assist S5*
Original operating instructions
Honda brief instructions
Toyota brief instructions
Mazda brief instructions
Kia brief instructions
Hyundai brief instructions
8 hex socket head cap screws, 16 washers, 8
countersunk bolts, 8 hexagon nut
* depends on the product version
---Separator---
---Separator---
Laser range finder
GLM 20
–
•
•
Part number
1 688 000 368
1 680 700 313
1 681 038 414
1 688 040 319
1 683 414 021
1 685 350 017
1 680 423 011
1 687 010 600
1 690 381 124
1 689 989 362
1 689 989 363
1 689 989 364
1 689 989 365
1 689 989 366
1 689 989 367
1 687 010 613
1 689 989 362 | 2018-08-01