Philips Sonicare FlexCare HX6911/50 Manual page 17

4 Remove the protective screen in front of the UV light bulb. (Fig. 14)
To remove the screen, grasp the edges next to the snaps, gently squeeze
and pull out the protective screen.
5 Remove the UV light bulb.
To remove the light bulb, grasp it and pull it out of the metal clasp.
6 Clean the protective screen and the UV light bulb with a damp cloth.
7 Reinsert the UV light bulb.
To reinsert the light bulb, align the bottom of the light bulb with the metal
clasp and push the bulb into the clasp.
8 Reinsert the protective screen.
To reinsert the screen, align the pegs on the screen with the slots on the
reflective surface near the UV light bulb. Push the screen straight into the
slots on the sanitiser.
Storage
If you are not going to use the appliance for an extended period of time,
remove the mains plug from the wall socket. Then clean the appliance and
store it in a cool and dry place away from direct sunlight. You can use the
cord wrap feature on the UV sanitiser to store the mains cord neatly.
Replacement
Brush head
Replace Sonicare brush heads every 3 months to achieve optimal results.
Use only genuine Philips Sonicare replacement brush heads.
UV light bulb
Replacement UV bulbs are available through the Philips Consumer Care
Centre in your country.
ENGLISH
17