Yamaha Rivage PM Series Supplemental Manual page 4

Theatre mode
■ To switch to Theatre mode on the DSP engine:
1.
Press the [MENU] key on the front panel of the DSP engine.
2.
Use the []/[] keys to select "Unit Mode".
3.
Press the [ENTER] key.
4.
Use the []/[] keys to select "Theatre".
Unit Mode
Theatre
5.
Press the [ENTER] key.
6.
The word "DONE" appears, and then the DSP engine restarts.
SELECTED CHANNEL VIEW screen
If you select Theatre mode for the UNIT MODE and press the BANK display button, the
SELECTED CHANNEL VIEW screen for an input channel will display the following information.
1
2
3
5
3
5
3
1
BANK display button
If this button is turned on, the EQ and Dynamics 1 & 2 graphs, and the bank switching buttons
will appear.
2 EQ graph
This field graphically indicates the approximate EQ and filter response.
3 Bank switching buttons
These buttons enable you to switch banks for EQ and Dynamics 1 & 2. Press the selected
button to access the NAME EDIT popup window. The corresponding bank and bank name
will appear in the EQ and dynamics fields.
If the EQ and Dynamics 1 & 2 are linked to a bank, the same bank name will appear in these
EQ and dynamics fields.
4
Bank LINK button
If this button is turned on, you can link and switch banks (A–D) for the EQ and Dynamics 1 &
2 all together as a group.
5 Dynamics graph
This field graphically indicates the input/output responses of the dynamics processors 1 and 2.
4
CONTENTS
4
RIVAGE PM series V2.5 Supplemental Manual