Removing The Gps Module (B); Removing The Main Board - Packard Bell Compasseo 800 Disassembly Manual

Removing the GPS module (B)

Follow these steps to remove the GPS module:
1. Disconnect the GPS cable from the main board.
2. Remove the two screws from the top left and bottom right of the GPS
module.
3. Lift the GPS module from the main board.
4. Disconnect the GPS cable from the GPS module.

Removing the main board

To remove the main board, do as follows:
1. Remove the bottom left screw from the Bluetooth module.
2. You can now easily lift the entire main board from the casing of the
device, including the speaker, speaker bracket and Bluetooth module.
Do not directly pull away the main board, as the cable and microphone
casing are still attached!
3. Disconnect the LCD cable and the microphone.
Compasseo 800 Disassembly Manual
Fig. 4 Disconnecting the LCD cable
6