HP ProDesk 400 G6 SFF Product End-Of-Life Disassembly Instructions page 3

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).

1
Release thumb screw
on the chassis rear
side.
Push side panel in
the end as shown,
and then pick up from
chassis.
See photo 1, 2
Screw tool:
Cross screwdriver
OD 6.0mm.
EL-MF877-00
Template Revision C
Last revalidation date 09-May-2018
Photo 1
Photo 2
HPI instructions for this template are available at EL-MF877-01
Page 3