Siemens SIMATIC PCS 7 Function Manual page 18

Installation and licensing
3.2 Installing the OpenPCS 7 station
Configuration
OpenPCS 7 station on
the OS single station
OpenPCS 7 station on
the CAS
OpenPCS 7 station on
the OS server
Note
If you only purchase the "OpenPCS 7 (OS Client)" software package, you will only receive
the license for OpenPCS 7 . The required licenses for OS clients must be obtained additionally
and must be available on the computer at runtime.
Requirement
Message queuing must be installed.
Procedure
An example procedure for the standalone variant is explained below:
1. Insert the "SIMATIC Process Control System; PCS 7" DVD in the DVD drive.
2. Run the "SETUP.exe" installation program.
3. Select the setup language and click "Next".
4. Close all programs and click "Next".
5. Read the product instructions and click "Next".
6. Accept the license conditions and click "Next".
7. Select the setup type "Install" and click "Next".
8. Enter the user information and click "Next".
9. Select the package installation and click "Next".
10.Select the program package and click "Next".
18
Requirements for installation
Installation requirements for the
OS single station
Installation requirements for the
CAS
Installation requirements for the
OS server
If, for example, you want to select the OpenPCS 7 station without OS client, click on
OpenPCS 7".
Intended use of the software
This serves to expand an
existing OS single station with
the functionality of an
OpenPCS 7 station.
This serves to expand an
existing Central Archive
Server with the functionality of
an OpenPCS 7 station.
This serves to expand an
existing OS server with the
functionality of anOpenPCS 7
station.
Function Manual, 05/2012, A5E02780178-02
Program packages for the
installation
● "OpenPCS 7" package
● Package "OS Single
Station"
● "OpenPCS 7" package
● Package "Central
Archive Server"
● "OpenPCS 7" package
● Package "OS-Server"
OpenPCS 7