Page 1
Owner’s Manual Floor-to-Ceiling Flat-Panel Mount Model: DMFC3265M 200x200 / 300x300 65" 400x200 / 400x400 55 lb. 11 lb. (25 kg) (5 kg) 600x400 Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com...
NOTE: Read the entire instruction manual before you start assembly and installation. WARNING • Do not begin the installation until you have read and understood the instructions and warnings contained in this manual. If you have any questions regarding any of the instructions or warnings, please visit www.tripplite.com/support.
Component Checklist IMPORTANT: Ensure you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty, visit www.tripplite.com/support for service. A (x1) B (x1) C (x2) D (x1) E (x1) F (x4) G (x4) H (x4) I (x1)
Page 4
Assembly (Optional) Install Floor Anchor (For Permanent Mounting Only) Steps 1a, 1b and 1c show different permanent installation options of the floor base. For non-permanent installation of the floor base, skip to Step 2. Once the floor base installation is complete, perform steps 1-6 as shown in the illustration in...
Page 5
Assembly Adjust the Ceiling/Floor Base Step on the foot panel to insert the screw (J). 19-02-092-933942-EN.indd 5 2/27/2019 2:15:27 PM...
Page 6
Assembly Attach Display Bracket Plate to Ceiling/Floor Base O1.7 in. (44 mm) +3° –3° 19-02-092-933942-EN.indd 6 2/27/2019 2:15:28 PM...
Page 7
Assembly Install Adapter Brackets For Flat-Back Screen Install Adapter Brackets For Recessed-Back Screen or to Access A/V Inputs Note: Choose appropriate screws, washers and spacers (if necessary) according to the type of screen. • Screw the VESA plates onto the display. Tighten all screws, but do not over-tighten.
Page 8
Assembly Hang Display onto Display Bracket Plate Using an assistant or mechanical lifting equipment, hook the display with attached adapter brackets over the top of the wall mount’s 360° arm assembly plate. Using a Phillips screwdriver, tighten the two safety bolts on the bottom of the adapter brackets to secure the unit.
Page 9
Assembly Attach Equipment Shelf to Ceiling/Floor Base O1.7 in. (44 mm) 19-02-092-933942-EN.indd 9 2/27/2019 2:15:31 PM...
Assembly Maintenance • Check that the base and mount are secure and safe to use at regular intervals (at least every three months). • Please visit www.tripplite.com if you have any questions. 19-02-092-933942-EN.indd 11 2/27/2019 2:15:34 PM...
Page 12
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support 19-02-092 93-3942_RevA 19-02-092-933942-EN.indd 12 2/27/2019 2:15:34 PM...
Need help?
Do you have a question about the DMFC3265M and is the answer not in the manual?
Questions and answers