For Your Safety; Installation - Belling BGH604WBG Instructions For Use And Installation

For Your Safety

These instructions have been drawn up for your safety and that of
others. You are therefore requested to read them carefully before
installing and using the appliance. Keep this instruction manual for
future reference as necessary. If the appliance is sold or moved,
make sure that the manual is handed over to the new user.

INSTALLATION

· Installation of the appliance and its connection to the
electrical mains must only be carried out by Authorised
Personnel. Before any service procedure, it is important to
check that the appliance is DISCONNECTED from the
electrical mains.
· WARNING: This appliance is a domestic kitchen appliance
suitable for indoor installation. It is not suitable for outdoor
installations such as alfresco kitchens or garages unless a
qualified, competent installer has deemed the location and
installation to be suitable & compliant.
· DO NOT MODIFY THIS APPLIANCE.
· After removing the appliance from the packaging, make
sure that it is undamaged and that the electrical lead is in
perfect condition. Otherwise, contact your dealer before
operating the appliance.
· Make sure that air is able to circulate freely around the
appliance. Poor ventilation produces a shortage of oxygen.
· Make sure that the available gas supply matches the type
of gas indicated on the data label and the gas type label
next to the gas connection point.
· Use of a gas cooking appliance produces heat and
moisture in the room in which it is installed. Ensure that
the room is well ventilated by keeping the air intakes open
and in good working order or by installing an extractor
hood with discharge pipe.
· If the appliance is used intensively for a long time the
effectiveness of the ventilation will have to be increased,
for example by opening a window or increasing the power
of any electric extractor fan.
3