To set the speaker level by using the test
tone
1
Press AMP MENU.
2
Press x/X repeatedly until “LEVEL” appears, then
press ENTER or c.
3
Press x/X to select “TEST TONE”, and press
ENTER or c.
4
Press x/X to select “T.TONE ON”.
The speakers emit the test tone in turn.
5
Press C to return, and then press x/X to select a
speaker:
“FL LEVEL” (front left speaker level)
“CEN LEVEL” (center speaker level)
“FR LEVEL” (front right speaker level)
“SR LEVEL” (surround right speaker level)
“SL LEVEL” (surround left speaker level)
“SW LEVEL” (subwoofer level).
6
Press ENTER or c.
The selected speaker emits the test tone.
7
From your listening position, adjust the speaker
level by pressing x/X.
8
Repeat steps 5 to 7 to adjust the other speaker
levels.
9
When you finish adjusting levels, press C to return.
10
Press x/X to select “TEST TONE”, and press
ENTER or c.
11
Press x/X to select “T.TONE OFF”, and press AMP
MENU to turn off the AMP menu.