Cleaning Techniques; Uso De Productos Químicos; Técnicas De Limpieza - PowerWasher H200C Owner's Manual

Electric high pressure washer
Table of Contents

Advertisement

POWERWASHER
4.3 USE OF CLEANING CHEMICALS
1. Remove wand
2. Install soap dispenser assembly
3. Remove bottle and check tube
4. The soap or wax will automatically be mixed with the water
and discharged through the nozzle.

4.4 CLEANING TECHNIQUES

When cleaning with the Pressure Washer, may cleaning tasks
can be solved with water alone, but for most tasks it is
advantageous to use a detergent also. A detergent ensures a
quick soaking of the dirt allowing the high pressure water to
penetrate and remove the dirt more effectively.
The low pressure provides a gentle application of soap and/or
wax. Low pressure is also recommended to rinse a surface after
wax application or for other applications which require the low
pressure of a garden hose. Low pressure is the equivalent of a
garden hose set at the lowest output to properly apply soap and
wax. FOR SOAP/WAX APPLICATION, ATTACH SOAP
DISPENSER ASSEMBLY.
APPLICATION OF SOAP DEGREASER
1. Apply the Pressure Washer Soap solution to a DRY work
surface. NOTE: WETTING THE SURFACE FIRST IS NOT
RECOMMENDED, AS IT DILUTES THE DETERGENT AND
REDUCES ITS CLEANING ABILITY. On a vertical surface, apply
soap horizontally from side to side starting from the bottom to
avoid streaking.
CAUTION: Avoid working on hot surfaces or in
WARNING direct sunlight to minimize the chance of the soap
damaging painted surfaces.
2. Allow the soap to remain on the surface for a short time
before rinsing.
4.3 USO DE PRODUCTOS QUÍMICOS
1. Extraer el lanzador turbo.
2. Instalar el lanzador de espuma.
3. Extraer la botella y controlar la manguera.
4. El jabón o la cera serán mezclados automáticamente con el agua
y descargados a través de la boquilla.
4.4 TÉCNICAS DE LIMPIEZA
Cuando se procede a la limpieza con la hidrolimpiadora, se pueden
efectuar diferentes operaciones sólo con el agua; en muchos
casos, sin embargo, es conveniente utilizar también un detergente.
El uso de un detergente asegura un tratamiento inmediato de la
suciedad, permitiendo al agua con alta presión penetrar y eliminar
eficazmente la suciedad.La baja presión permite aplicar en modo
delicado el jabón y/o la cera.
Se recomienda el uso de la baja presión para enjuagar una
superficie después de la aplicación de cera o para otras
aplicaciones que requieren la baja presión de una manguera de
jardín. La baja presión corresponde a la configuración de la
manguera de jardín a la potencia menor para aplicar en modo
correcto el jabón y la cera. PARA APLICAR JABÓN/CERA,
INSERTEN EL LANZADOR DE ESPUMA.
APLICACIÓN DE JABÓN
1. Apliquen la solución de jabón de la hidrolimpiadora sobre una
superficie de trabajo SECA. NOTA: NO SE ACONSEJA MOJAR LA
SUPERFICIE ANTES, PUESTO QUE DILUYE EL DETERGENTE Y
REDUCE SU CAPACIDAD DE LIMPIEZA. Ante la presencia de una
superficie vertical, apliquen el jabón horizontalmente comenzando
por la parte baja para evitar estriados.
ATENCIÓN: Eviten trabajar sobre superficies
ATENCIÓN calientes o a la luz directa del sol, para disminuir lo
más posible las posibilidades de que el jabón dañe
las superficies pintadas.
2. Antes de enjuagar, dejen el jabón sobre la superficie durante un
breve lapso de tiempo.
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

H100p

Table of Contents