Applying Power - Motorola MVME162P2 Series Installation And Use Manual

Applying Power

When you power up (or when you reset) the system, the firmware executes
some self-checks and proceeds to the hardware initialization. The system
startup flows in a predetermined sequence, following the hierarchy
inherent in the processor and the MVME162P2 hardware. The figure
below charts the flow of the basic initialization sequence that takes place
during system startup.
STARTUP
INITIALIZATION
POST
BOOTING
MONITOR
Figure 2-1. MVME162P2/Firmware System Startup
http://www.motorola.com/computer/literature
Power-up/reset initialization
Initialization of devices on the MVME162P2
module/system
Power-On Self-Test diagnostics
Firmware-configured boot mechanism,
if so configured. Default is no boot.
Interactive, command-driven on-line
debugger, when terminal connected.
Applying Power
2-3
2