Scsi Connector - J23; Vmebus Connectors (P1, P2) - Motorola MVME162P2 Series Installation And Use Manual

SCSI Connector - J23

Connector J23 is a standard 68-pin SCSI connector mounted on the front
panel of the MVME162P2 embedded controller.
assignments for J23.

VMEbus Connectors (P1, P2)

Two three-row 96-pin DIN type connectors, P1 and P2, supply the
interface between the base board and the VMEbus. P1 provides power and
VME signals for 24-bit addressing and 16-bit data. Its pin assignments are
set by the IEEE P1014-1987 VMEbus Specification. P2 Row B supplies
the base board with power, with the upper 8 VMEbus address lines, and
with an additional 16 VMEbus data lines. P2 rows A and C are not used in
the MVME162P2 implementation. The pin assignments for P1and P2 are
listed in
http://www.motorola.com/computer/literature
Table 5-6 and Table 5-7
SCSI Connector - J23
Table 5-5
respectively.
lists the pin
5
5-5