Ethernet Connector - J9; Serial Connector - J17; Table 5-3. Db15 Ethernet Connector Pin Assignments; Table 5-4. Serial Connector Pin Assignments - Motorola MVME162P2 Series Installation And Use Manual

Pin Assignments

Ethernet Connector - J9

Table 5-3. DB15 Ethernet Connector Pin Assignments

5

Serial Connector - J17

5-4
The MVME162P2's Ethernet interface is implemented with a DB15
connector located on the front panel of the board. The pin assignments for
this connector are listed in the following table.
1 GND
3 T+
5 R+
7 No Connection
9 C–
11 GND
13 +12V
15 No Connection
A four-segment RJ45 connector located on the front panel of the
MVME162P2 provides the interface to the four asynchronous serial ports.
The pin assignments for each segment in the connector are as follows.

Table 5-4. Serial Connector Pin Assignments

C+
GND
GND
GND
T–
R–
GND
1 DCDn
2 RTSn
3 Ground
4 TXDn
5 RXDn
6 Ground
7 CTSn
8 DTRn
Computer Group Literature Center Web Site
2
4
6
8
10
12
14