Sony HT-SF370 Operating Instructions Manual page 22

Sony home theatre system operating instructions
Table of Contents

Advertisement

L
EZW-T100
R
AUDIO IN
AUDIO IN
COAX IN
AUTO
VIDEO
SA-CD/CD
TV
CAL MIC
DC5V
0.7A MAX
HDMI
DVD IN
BD IN
DMPORT
A
A
Audio/video
Audio/video
signals
Blu-ray Disc
DVD player
A HDMI cable (not supplied)
Sony recommends that you use an HDMI-
authorized cable or Sony HDMI cable.
* When you use Audio Return Channel (ARC)
function, the audio signal is output from the TV to
the receiver.
Notes
• When the TV is compatible with Audio Return
Channel (ARC) function, the TV sound will
automatically output from the speakers connected
to the receiver. If not, see page 19 for the audio
connection of TV to the receiver. Be sure to set
"ARC" to "ARC ON" in SET HDMI menu (page
45).
• All the HDMI jacks on the receiver function in the
same way. For example, you can connect a
"PlayStation 3" etc., to any available HDMI jack.
22
US
TV, etc.
Audio/video
signals
A
DIGITAL
ANTENNA
AM
OPT IN
OPT IN
SAT/CATV
TV
ARC
SAT/CATV IN
TV OUT
A
Audio/video
signals
signals
Satellite tuner,
cable television
player
tuner
l : Signal flow
Notes on HDMI connections
• An audio signal input to the HDMI IN jack
is output from the SPEAKERS jacks and
HDMI OUT jack. It is not output from any
other audio jacks.
• Video signals input to the HDMI IN jack can
only be output from the HDMI OUT jack.
• The multi/stereo area audio signals of a
Super Audio CD are not output.
• Audio signals (sampling frequency, bit
length, etc.) transmitted from an HDMI jack
may be suppressed by the connected
component. Check the setup of the
connected component if the image is poor or
the sound does not come out of a component
connected via the HDMI cable.
• Sound may be interrupted when the
sampling frequency, the number of channels
or the audio format of the audio output
signals from the playback component is
switched.
• When the connected component is not
compatible with copyright protection
technology (HDCP), the image and/or the
sound from the HDMI OUT jack may be
distorted or may not be output.
In this case, check the specification of the
connected component.
• You can enjoy multi channel Linear PCM
only with an HDMI connection.
• Set the image resolution of the playback
component to 720p, 1080i or 1080p when
you output 96 kHz multi channel sound over
an HDMI connection.
• You may need to make certain settings on
the image resolution of the player before you
can enjoy multi channel Linear PCM. Refer
to the operating instructions of the player.
• Refer to the operating instructions of each
component connected for details.
• Not every HDMI component supports all
functions that are defined by the specified
HDMI version. For example, components
that support HDMI, version 1.4, may not
support Audio Return Channel (ARC).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Str-ks370 - a/v receiverHt-ss370

Table of Contents