Led Indicator - Toshiba APOGEE FLN APG001Z Function Manual

2.3. LED indicator

The LED shows the present status of the network and error.
■Layout of LED
COM
ERR
The option has two LEDs. Those function are below table.
COM
OFF
(Green)
ERR
(Red)
1s
A
State
COM LED: OFF
A
ERR LED: Flashing 5 times in 1 second
COM LED: OFF
B
ERR LED: 3 times in 2 seconds, Off for 1 second
COM LED: ON
C
ERR LED: OFF 0.5s, ON 0.5s
COM LED: Flashing
D
ERR LED: -
COM LED: -
E
ERR LED: Flashing
COM LED: OFF
Ｆ
ERR LED: OFF
2.1
2.2
2.3
2.4
2.5
OFF
2s 1s
B
LEDs
- 4 -
ON
OFF
1s
C D
APG001Z failure.
Communication
Confirm the
connection of the cable.
Invalid configuration was detected.
(Note)When inverter occurred in e-23
or e-24, the LED becomes this state.
Valid message was received for this
node
Invalid message was received (any
node)
No communication
Confirm the network condition and
connection of the cable.
E6581542①
OFF OFF
OFF
E F
Comment
loss was detected.
network condition and