Advertisement
7
Button
8
Photocell probe
9
Outlet indicate light
10
Power ON
11,14,13,15 Countdown 2H/4H/6H/8H Press to remote control the receiver
12
Photocell
16
Power OFF
17
Indicate light
C. Pairing instruction
1. Plug-in the receiver to the socket, outlet indicate light(No.9) starts flashing, it's ok to do the pairing;
2. Press ON/OFF button on the transmitter, outlet indicate light(No.9) stop flashing, pairing success.
3. If you want the receiver, which already pair to one transmitter, to pair another new or more
transmitter, plug-in this receiver, long press manual button(No.7) more than 3 seconds, ready to
pairing when outlet indicate light(No.9) starts flashing, this moment press the ON/OFF of another new
transmitter, pairing success when outlet indicate light(No.9) stop flashing.
4. If outlet indicate light(No.9) keep flashing more than 10 seconds, but still don't pair successfully,
outlet indicate light(No.9) OFF, exit the pairing mold.
Remark:
When use this product first time, in order to avoid two or more receivers connecting to the same
➢
transmitter, do not plug-in two or more receivers at the same time;
➢
Make sure there's not shelter above the receiver, which will interfere the signal transmission and
photocell function.
➢
For outdoor use.
➢
Do not use with any appliance, which exceeds the capacity of the Timer.
➢
Always ensure that the plug of any appliance is fully inserted into the Timer.
➢
Unplug before program setting.
➢
If you need to clean the Timer, remove from the mains and wipe with a dry cloth. Do not immerse
in water or any liquid.
➢
Fan heaters and heaters with exposed elements should not be left unattended, and it is
recommended that this type of appliances are not to be connected to timers.
➢
Keep away from children.
D. Deleting code
When the receiver is under working, long press manual button(No.7) more than 3 seconds, outlet
indicate light(No.9) starts flashing, this moment short press manual button(No.7), outlet indicate
light(No.9) stop flashing, deleting all the code successfully. If you need to pair, pls go back to Step C.
E. Function illustration
1.
When receiver receives the transmitter's ON signal, outlet device ON, both outlet indicate light (No.9)
and button No.6 ON; When receiver receive the transmitter OFF signal, outlet device OFF, both outlet
indicate light (No.9) and button No.6 ON.
2.
When receiver receives the transmitter's countdown signal
both matching countdown LED light No.11/14/13/15 and outlet indicate light (No.9)ON; when
countdown run out
and outlet indicate light (No.9)
working at night daily.
3. When receiver receives the transmitter's photocell signal, photocell indicate light(No.1) ON；If the
circumstance is light (above 8Lux-45 Lux), the outlet device OFF; If the circumstance is dark(under
8Lux-45Lux），both the outlet device and outlet indicate light (No.9) ON.
F.Specifications
125VAC /60HZ 1/2HP
15A Resistance 1250W tungsten
Press to transfer the receiver's different functions
Detect the illumination automatically
The indicate light ON when the outlet is plugged-in
Press to remote control the receiver's outlet ON
hours/4 hours/6 hours/8 hours later,
Press to remote control the receiver to be trigger ON when dusk,
trigger OFF when dawn
Press to remote control the receiver to power OFF
Indicate light ON when press any transmitter's button
at
dusk, outlet device OFF, both matching countdown LED light No.11/14/13/15
OFF, countdown function will stop working at day time, but repeat
at night
to be OFF when 2
which repeat
at
dusk, outlet device ON immediately,
daily.
Advertisement
