Step 3: Tv And Video Component Hookups - Sony DAV-FC8 Operating Instructions Manual

Step 3: TV and Video Component Hookups

Required cords
Video cord for connecting a TV
Audio/video cords (not supplied)
When connecting a cord, be sure to match the colour-coded sleeves to the appropriate jacks on the
components.
Terminals for connecting video components
Connect the
TV
VCR
Digital satellite receiver
Notes
• When you select VIDEO 1 using the FUNCTION button, the signal is not output via VIDEO OUT and AUDIO
OUT L/R jacks (VIDEO 1).
• When you use the VIDEO 1 line outputs, please set the system to 2CH STEREO mode. If the system is not in 2CH
STEREO mode, the line outputs may not function properly.
• When the mode of the system is set to "DVD," the signal is output from the S VIDEO OUT or COMPONENT OUT
jacks.
• When the mode of the system is set to "DVD" and "PROGRESSIVE" is selected in "SCREEN SETUP," the signal
is output only from the COMPONENT OUT jacks.
Tips
• When using the S video jack instead of the video jacks, your TV monitor must also be connected via an S video
jack. S video signals are on a separate bus from the video signals and will not be output through the video jacks.
• When using the COMPONENT VIDEO OUT jacks (Y, P
must also be connected via COMPONENT VIDEO OUT jacks (Y,P
format signals, you must use this connection and set "COMPONENT OUT" to "PROGRESSIVE" in "SCREEN
SETUP" (page 68).
20 US
To the
MONITOR OUT jack
VIDEO 1 jacks
VIDEO 2 jacks
/C
B
Yellow
Yellow (Video)
White (L/audio)
Red (R/audio)
, P /C ) instead of the video jacks, your TV monitor
B R R
/C , P /C ). If your TV accepts progressive
B B R R