Using Optional Audio Components - Sony CMT-U1BT Operating Instructions Manual

To change the play mode
Press PLAY MODE
USB device is stopped. You can select normal
play (" " for all files in the folder on the
digital music player), shuffle play ("SHUF" or "
SHUF"), or program play ("PGM").
Notes on the USB device
• With some connected USB devices, after an operation
is performed, there may be a delay before it is
performed by this system.
• This system does not necessarily support all the
functions provided in a connected USB device.
• The playback order for the system may differ from the
playback order of the connected USB device.
• Always press 
appears before removing the USB device. Removing
the USB device while "Device Stop" is not displayed
may corrupt the data on it or damage the USB device
itself.
• Do not save other types of files or unnecessary folders
on an USB device that has audio files.
• Folders that have no audio files are skipped.
• Files are played back in the order that they are
transferred to the USB device.
• The maximum numbers of folders and files that can be
contained on a single USB device are as follows:
– Digital music player: 65,535 groups (maximum 999
tracks per group)/65,535 tracks
– USB storage media: 512 folders (including the root
folder, maximum 999 files per folder, maximum 255
folders per folder)/65,535 files
The maximum number of files and folders may vary
depending on the file and folder structure.
• The audio formats that you can listen to with this
system are as follows:
– MP3: file extension ".mp3"
– Windows Media file: file extension ".wma"
– AAC: file extension ".m4a"
Note that even when file names have the above file
extensions, if the actual file differs, the system may
produce noise or may malfunction.
• Compatibility with all encoding/writing softwares,
recording devices, and recording media cannot be
guaranteed. Incompatible USB device may produce
noise or interrupted audio or may not play at all.
1
GB

repeatedly while the

and make sure that "Device Stop"
Using optional audio
components
1
Connect additional audio component
to the AUDIO IN jack
using an audio analog cord (not
supplied).
2
Turn down the volume.
Press VOLUME –
3
Select the AUDIO IN function.

Press AUDIO IN
4
Start playing the connected
component.
5
Adjust the volume.
Press VOLUME +/–

on the unit

.
on the unit.

.