Sony BDV-E980W Operating Instructions Manual page 25

When the component does not have an HDMI OUT jack
Connect the system so that video signals from the system and other component are sent to the TV, and
audio signals from the component are sent to the system as follows.
TV
System
If the component plays sound only, connect the audio output of the component to the system.
Depending on the jacks on the component, select the connection method.
• Component which has a digital coaxial output jack: A
• Component which does not have a digital coaxial output jack: B
Rear panel of the unit
: Signal flow
A Digital coaxial cord
(not supplied)
To the digital coaxial out jack
of the VCR or digital satellite
receiver, etc.
• If you make connection above, set [Control for HDMI] in [HDMI Settings] of [System Settings] to [Off] (page 63).
• You can enjoy component sound by selecting the "SAT/CABLE" function for connection A, or the "AUDIO"
function for connection B (page 30).
Video out
Component
Audio out
DIGITAL IN
SAT/
CABLE COAXIAL
L
AUDIO IN
R
AUDIO
Red
White
COAXIAL L
DIGITAL OUT AUDIO OUT
Signal flow
: Video signal
: Audio signal
White
B Audio cord
(not supplied)
Red
To the audio out jacks of the VCR, digital
satellite receiver, PlayStation, or
R
portable audio source, etc.
25
GB