Table of Contents
Advertisement
Step 3: Performing the
Quick Setup
Follow the Steps below to make the basic
adjustments for using the system.
Note
• When you connect the system and the TV with the
HDMI cable (not supplied), you need to set the type
of video output for matching your TV. For details, see
“Setting the type of video output to match your TV”
(page 22).
"/1
C/X/x/c,
DISPLAY
1
Turn on the TV.
2
Press [/1.
Note
• Make sure that the function is set to “DVD”
(page 23).
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [
] to run QUICK SETUP.]
ENTER
appears at the bottom of the TV screen. If
this message does not appear, recall the
Quick Setup display (page 22) and perform
again.
4
Press
without inserting a disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
GB
LANGUAGE SETUP
OSD:
ENGLISH
MENU:
ENGLISH
AUDIO:
FRENCH
SUBTITLE:
SPANISH
PORTUGUESE
5
Press X/x to select a language.
The system displays the menu and subtitles
in the selected language.
6
Press
.
The Setup Display for selecting the aspect
ratio of the TV to be connected appears.
VIDEO SETUP
TV TYPE:
16:9
LINE:
16:9
PAUSE MODE:
4:3 LETTER BOX
4:3 PAN SCAN
7
Press X/x to select the setting that
matches your TV type.
x If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
[16:9] (page 47)
x If you have a 4:3 standard TV
[4:3 LETTER BOX] or [4:3 PAN SCAN]
(page 47)
8
Press
.
The Setup Display for selecting the output
method for video signals from the EURO
AV T OUTPUT (TO TV) jack on the rear
panel of the unit appears.
VIDEO SETUP
TV TYPE:
16:9
LINE:
VIDEO
PAUSE MODE:
VIDEO
VIDEO
RGB
VIDEO
Page 20
Hide quick links:
Advertisement
Table of Contents
