Advertisement
Content
---------------------------2
-------------------------
-----------------------
Ⅷ.
-------------------------------
Ⅸ.
Technical Data
---------------------3
---------------------
3
-----
4
--------------
6
8
11
--
11
12
Ⅰ.Operating Instruction
1-1. Open-package inspection
1). After opening the package, please check the attached parts and
components, including operation manual and checking whether the
inverter is in good condition?
If found any inverter broken or components missing, do not turn on the
machine , feedback to the carrier or supplier.
Note:
1). Please keep the box and packing materials in case the use in future.
2). The product is very heavy (check attachment as reference), please
be careful to carry.
1-2. Installation notice:
1). The products should be well-ventilated, away from water and the
corrosive and combustible gases.
2). Do not set it in a corner, ensure the bottom of the front panel, the rear
panel fan outlet and the side of the machine are well-ventilated.
3). The environment temperature should remain 0 － 40 ℃.
4). If the machine operates under low temperature environment, it would
cause water condense, only in a absolute dry condition can the
machine would work normal, otherwise there will be a electric shock.
5). Install the inverter near the mains input socket or nearby the switch,
to draw out plugs then cut off mains supply once there is an emergency.
Attention:
1). Load should be turned off before connecting to inverter and turned on
one by one after connecting completed.
2). The inverter should be connected to a socket with a corresponding
current protection.
3). All power sockets should link with ground protection.
4). No matter input power cable inserts to mains socket or not, the
inverter will also continue outputing possibly, turning off the inverter
can not guarantee there is no current inside the machine. In order to
make sure to cut off the output of inverter, you should turn off all the
switches then turn off the main supply.
5). To load inductive appliances such as electromotor, displayer and laser
printer, inverter capacity should be twice as loading machine's rated
power at least.
2
Advertisement
