receiving water from the water dispenser
•
You should use the type of container that can fit
under the water dispenser. Place the container
properly underneath and push on the lever for water
to flow.
•
Before you dispense the water, make sure the lock
device is at "Unlock" position.
•
Ensure to slide to "Lock" position after each
use to prevent children from playing with the
lever.
•
When at "Lock" position, do not push on
the lever with force. It will damage the
mechanism.
cleaning the interior and the exterior of the unit
•
Remove all the shelves and drawers.
•
Wipe the inside of the unit with a weak solution of bicarbonate soda and then rinse with warm
water using a sponge or cloth. Wipe completely dry before replacing the shelves and drawers.
•
Use a damp cloth to clean the exterior, and then wipe with a standard furniture polish. Make sure
that the door is closed to avoid the polish getting on the magnetic door seal or inside the unit.
•
The grille of the condenser at the back of the unit and the adjacent components can be
vacuumed using a soft brush attachment.
cleaning the water tank and water dispenser
•
Remove the water tank. Wash the tank, tank cover, small lid and valve lightly under water (see
the section "before using the water dispenser").
•
After cleaning, dry them thoroughly before installing back in the fridge.
•
Wipe the receiving base of the water dispenser with dry towel regularly to avoid
overflowing.
12
Receiving
base